Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-13-2007, 08:15 PM   #11
5th_bike
Senior Member
 
5th_bike's Avatar
 
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
I changed the oil and oil filter in my 2005 GZ250 right after I had brought it home, because it was two years old. A few remarks and a question, after reading the above:

1) A GZ250 oil change is Messy, to put it mildly. At first, after removing the plug, the oil flows straight down in a thick beam, but in the trickle phase after that it goes sideways onto the left exhaust pipe. If unsufficiently removed, it will temporarily give a burning smell later on.

2) A GZ250 oil filter change is even Messier. (BTW the torque on the three little bolts of the oil filter cap I measured at 7 lbs/ft when unscrewing them). During removal of the cap, a big puddle of oil comes sploosh from underneath and all over the motor and parts underneath it, including the right exhaust pipe...

Then, the question: why should it be necessary to remove the oil sump cap (I assume =the part on the bottom that the drain plug is in the middle of) for an oil change ? I only removed the drain plug and let the oil leak out (moving the motor left and right gives a little extra old oil) - I didn't know the oil sump cap needs removal too, and for what. If it does, please let me know, if it doesn't, please just ignore, thank you.
__________________
2005 "Saturn Black", stock + tach



Login or Register to Remove Ads
5th_bike is offline  
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.