Install a 16 Tooth Front Sprocket - GZ 250 Forums

		GZ 250 Forums > GZ250-Specific > Instructional Articles
Install a 16 Tooth Front Sprocket

jonathan180iq Install a 16 Tooth Front... 04-18-2007, 08:50 PM

golem Ok, so I installed a new... 07-24-2014, 12:42 PM

beefjerky This looks great and I want... 09-18-2014, 06:32 AM

golem I don't know if this is going... 09-22-2014, 03:19 PM

Water Warrior 2 You will know soon enough.... 09-23-2014, 04:20 AM

Suzuki-san got er dun - 16T 04-05-2015, 08:39 PM

PG tips I went looking for a JT 16T... 04-16-2015, 12:20 PM

PaperClip

raul10141964 I recommend to mode the... 04-05-2015, 08:59 PM

raul10141964 mod the carb and filter gibe... 04-16-2015, 01:01 PM

PG tips I might try that too, but its... 04-16-2015, 03:05 PM

jonathan180iq Definitely. Lowering engine... 04-16-2015, 04:02 PM

PG tips Do either of these mods... 04-16-2015, 05:46 PM

More replies below current depth...

raul10141964 The extra hp Wil be... 04-16-2015, 03:19 PM

raul10141964 60 mph 04-16-2015, 05:48 PM

spldart I only just installed my 16t... 06-20-2015, 08:16 PM

spldart Mixed mileage on my commute... 06-26-2015, 07:20 AM

Vegas Street Rider Installing 16t sprocket 09-09-2015, 07:49 PM

raul10141964 I recommend to mod the... 09-09-2015, 07:55 PM

spldart Link to carb mod of which you... 09-09-2015, 08:03 PM

Vegas Street Rider Put on the 16t sprocket on my... 09-15-2015, 10:47 PM

itsagz250butitsmine Thanks for the write up! The... 08-25-2016, 08:43 PM

Vegas Street Rider Good news. You should... 08-25-2016, 10:44 PM

Razorburns One of the 1st things I did... 07-20-2017, 11:53 PM

initialtvb Quick Question 11-15-2017, 10:56 PM

Vegas Street Rider Where you really gain with... 11-16-2017, 02:23 PM

kilo0195 I also wouldn't drop the rear... 12-11-2017, 10:07 AM

wacio I left original 15 tooth... 04-07-2019, 04:31 PM

jonathan180iq First Impressions 04-18-2007, 09:11 PM

Dupo Nice job on the How To guide! 04-18-2007, 09:13 PM

jonathan180iq I'm not sure if it's too... 04-18-2007, 09:30 PM

Bill Well done job on the "How... 04-18-2007, 11:24 PM

Water Warrior 2 Jonathan, excellant "how to"... 04-19-2007, 12:19 AM

Badbob Good job. :tup: I've been... 04-19-2007, 05:27 AM

davidc83 Nice job. I think even I can... 04-19-2007, 06:56 AM

jonathan180iq BadBob, were you making fun... 04-19-2007, 11:51 AM

Badbob Nah! Not making fun. Mine... 04-21-2007, 10:17 AM

Jordan310 Sprocket 04-24-2007, 01:03 AM

Water Warrior 2 Thr rubber is supposed to... 04-28-2007, 12:08 AM

jonathan180iq Jordan, I adjusted the chain... 04-30-2007, 04:55 PM

BadMojo Outstanding, excellent how... 04-30-2007, 08:42 PM

Jordan310 Something tells me to get the... 04-30-2007, 11:26 PM

jonathan180iq There is no OEM Suzuki 16T... 05-01-2007, 04:47 PM

Jordan310 Actually, I spoke to a... 05-01-2007, 08:40 PM

Water Warrior 2 Changing both sprockets to... 05-02-2007, 02:22 AM

Jordan310 I wonder if that would be... 05-02-2007, 08:12 AM

jonathan180iq Who makes a big bore kit for... 05-02-2007, 04:42 PM

Water Warrior 2 Like the sound of a big bore... 05-02-2007, 07:20 PM

Jordan310 Well, Obviously yes I... 05-02-2007, 09:25 PM

jonathan180iq I'm going to be skeptical of... 05-02-2007, 11:20 PM

Jordan310 Bro, look at the link in my... 05-03-2007, 01:41 AM

Gadzooks Mike 16T Sprocket and Hill Climb 05-07-2007, 04:37 PM

jonathan180iq Thanks for getting back on... 05-08-2007, 11:00 AM

jonathan180iq I think in this case... 05-08-2007, 11:04 AM

Gadzooks Mike Thanks for the info Johathan!... 05-08-2007, 11:41 AM

Jordan310 Im wondering if you saw that... 05-08-2007, 09:18 PM

jonathan180iq Seems to depend on the number... 05-09-2007, 09:10 AM

Gadzooks Mike Hey, what can I say? I post... 05-09-2007, 07:37 PM

davidc83 Actually, doing 55mph should... 05-10-2007, 06:39 AM

Gadzooks Mike Yes, I believe his name is... 05-10-2007, 08:25 AM

Jordan310 I consistantly keep my 07, at... 05-10-2007, 11:55 AM

Gadzooks Mike Well, in any case, I've... 05-10-2007, 12:08 PM

Gadzooks Mike Hey, I'm not "Newby"... 05-10-2007, 12:09 PM

jonathan180iq There you go. It must have... 05-11-2007, 04:32 PM

Gadzooks Mike Got my "go fast" (sprocket)... 05-14-2007, 06:49 PM

jonathan180iq Just wait until you get out... 05-14-2007, 11:33 PM

Jordan310 55-60? My bike does that... 05-14-2007, 11:40 PM

Gadzooks Mike So did mine, Jordan, but... 05-15-2007, 10:02 AM

Jordan310 Gadz, But wait. I never... 05-15-2007, 04:02 PM

Gadzooks Mike Well, there you go. Your... 05-15-2007, 04:40 PM

jonathan180iq you have a part number on... 05-16-2007, 09:12 AM

jonathan180iq As I stated before, this... 05-16-2007, 02:32 PM

Jordan310 I usually end up averaging... 05-16-2007, 02:45 PM

jonathan180iq That's a big N-O. There is an... 05-16-2007, 04:14 PM

Jordan310 K. Ill look for that part... 05-16-2007, 04:33 PM

jonathan180iq Just for future reference,... 05-25-2007, 03:21 PM

Dirt_McGert Just ordered a JT 16-tooth... 05-29-2007, 04:18 PM

Jordan310 They are a great company. I... 05-29-2007, 07:47 PM

jonathan180iq Whatever it is doesn't really... 05-30-2007, 08:02 AM

Jordan310 :tdown: Thanks for the... 05-30-2007, 09:11 AM

jonathan180iq That should read "Whatever it... 05-30-2007, 10:14 AM

Jordan310 Im not sure. Why would JT... 05-30-2007, 10:45 AM

jonathan180iq My order didn't come with... 05-30-2007, 11:13 AM

Jordan310 5653551 JT Sprockets Bushing ... 05-30-2007, 11:21 AM

jonathan180iq That's your order number. ... 05-30-2007, 09:39 PM

jonathan180iq Found it. ... 05-30-2007, 09:58 PM

Jordan310 Weird. I was wondering why... 05-31-2007, 01:34 PM

jrockrat RPM? 06-15-2007, 12:25 PM

jonathan180iq For that info to be even more... 06-15-2007, 10:45 PM

El_Shorto Guys, how long did it take... 06-22-2007, 01:48 PM

Gadzooks Mike It took a couple of weeks to... 06-22-2007, 01:57 PM

jonathan180iq I got mine in 6 days. ....... 06-24-2007, 11:52 PM

El_Shorto ordered it from the place... 06-25-2007, 05:00 PM

Easy Rider Ordered mine through the... 06-25-2007, 06:16 PM

jonathan180iq Good idea to have out there.... 06-25-2007, 06:26 PM

Easy Rider In some exotic circumstances... 06-25-2007, 10:40 PM

jonathan180iq WORD! :2tup: 06-26-2007, 08:47 AM

Dirt_McGert Torque Specs for Front... 06-30-2007, 11:15 AM

Easy Rider Re: Torque Specs for Front... 06-30-2007, 07:23 PM

Sarris Torque spec 06-30-2007, 07:31 PM

quint8 16T Sprocket 08-06-2007, 08:39 PM

xt477 jt sprockets or bikebandit? ... 08-06-2007, 08:53 PM

quint8 I checked with all the... 08-06-2007, 09:08 PM

Quimrider I've been trying to order one... 08-24-2007, 10:13 AM

Easy Rider Have you visited or called... 08-24-2007, 10:20 AM

Quimrider There's really only one... 08-24-2007, 10:30 AM

Stretch I am crossing my fingers on... 08-24-2007, 10:36 AM

Quimrider FYI I don't know if it's been... 08-24-2007, 10:44 AM

Quimrider I gave up trying to order one... 08-26-2007, 10:21 AM

Quimrider The local shop said it is on... 08-30-2007, 05:18 PM

Stretch ORDERING INFO! 08-30-2007, 06:10 PM

Quimrider correct url:... 08-31-2007, 01:10 PM

Stretch Mea Culpa! 08-31-2007, 06:32 PM

Jaime I've installed mine today and... 09-07-2007, 09:01 PM

Gadzooks Mike Jaime, maybe you can do... 09-08-2007, 05:57 PM

davidc83 Mike, do you mean you wouldnt... 09-08-2007, 06:15 PM

Jaime I've understood "going back... 09-08-2007, 06:54 PM

Jaime 15T vs 16T speeds 09-08-2007, 07:18 PM

jonathan180iq Again, nice work. I really... 09-09-2007, 12:07 PM

Gadzooks Mike But then you'd have a Rebel! ... 09-09-2007, 06:05 PM

Jaime Next week I'll post a video... 09-09-2007, 06:19 PM

Badbob That wouldn't have to stop... 09-10-2007, 06:33 PM

Water Warrior 2 The rebel is also a slightly... 09-11-2007, 08:06 PM

Gadzooks Mike I agree with that. When I... 09-12-2007, 08:39 AM

jonathan180iq I think Honda remedied the... 09-12-2007, 12:12 PM

Badbob I'd ride one if they made... 09-14-2007, 05:12 PM

Gadzooks Mike I'm not sure I'd call the... 09-15-2007, 02:23 PM

Quimrider Finally after waiting nearly... 09-16-2007, 09:38 AM

Easy Rider It's all a matter if... 09-16-2007, 05:11 PM

Badbob I got my new sprockets and... 09-16-2007, 09:24 PM

Stretch Finally got my 16T in and it... 09-19-2007, 09:51 PM

Bud Trouble with backorder of a... 05-12-2008, 05:29 PM

Easy Rider Re: Trouble with backorder of... 05-12-2008, 06:03 PM

Quimrider I'm not sure if it's in this... 05-12-2008, 11:04 PM

jonathan180iq I think I remember Jaime... 05-13-2008, 08:19 AM

5th_bike Hey Jonathan I like your... 05-13-2008, 06:27 PM

jonathan180iq Where are you from? 05-13-2008, 08:35 PM

5th_bike From The Kingdom of The... 05-13-2008, 11:39 PM

jonathan180iq Wow. That's nice. I didn't... 05-14-2008, 08:33 AM

5th_bike Yes, actually my location... 05-14-2008, 07:13 PM

jonathan180iq hahahaha Yeah. I haven't... 05-15-2008, 08:39 AM

patrick_777 Installed mine today. I... 06-23-2008, 12:57 PM

jonathan180iq It'll stay that way too.... 06-23-2008, 01:22 PM

patrick_777 http://www.bikebandit.com/prod... 06-23-2008, 02:22 PM

jonathan180iq Well that's good. They must... 06-23-2008, 03:24 PM

patrick_777 I just rode down to work and... 06-23-2008, 06:32 PM

patrick_777 For those that care, I... 06-30-2008, 09:15 PM

Easy Rider And in the end, that's all... 06-30-2008, 09:18 PM

Jpsalvador Can you clarify more on the... 07-17-2008, 11:13 PM

Badbob The manual tells you how to... 07-18-2008, 06:52 AM

Easy Rider Bad to the point of being... 07-18-2008, 08:33 AM

jonathan180iq You can get a... 07-18-2008, 08:57 AM

JWR Re: Install a 16 Tooth Front... 02-06-2009, 04:47 PM

mr. softie Re: Install a 16 Tooth Front... 02-07-2009, 12:09 AM

JWR Re: Install a 16 Tooth Front... 02-07-2009, 08:48 AM

Easy Rider Re: Install a 16 Tooth Front... 02-07-2009, 11:17 AM

JWR Re: Install a 16 Tooth Front... 02-07-2009, 03:38 PM

Easy Rider Re: Install a 16 Tooth Front... 02-07-2009, 05:55 PM

JWR Re: Install a 16 Tooth Front... 02-07-2009, 06:10 PM

Easy Rider Re: Install a 16 Tooth Front... 02-07-2009, 08:06 PM

JWR Re: Install a 16 Tooth Front... 02-07-2009, 08:19 PM

Canuck Re: Install a 16 Tooth Front... 02-28-2009, 12:56 PM

Easy Rider Re: Install a 16 Tooth Front... 02-28-2009, 01:56 PM

Canuck Re: Install a 16 Tooth Front... 02-28-2009, 10:38 PM

northern_ninja Re: Install a 16 Tooth Front... 03-23-2009, 05:03 PM

Easy Rider Re: Install a 16 Tooth Front... 03-23-2009, 07:07 PM

kleinboy Re: Install a 16 Tooth Front... 04-06-2009, 06:48 PM

adrianinflorida Re: Install a 16 Tooth Front... 04-06-2009, 06:56 PM

David Bo Re: Install a 16 Tooth Front... 04-06-2009, 07:47 PM

Guest Re: Install a 16 Tooth Front... 04-06-2009, 11:12 PM

Quimrider Re: Install a 16 Tooth Front... 04-07-2009, 12:53 AM

David Bo Re: Install a 16 Tooth Front... 04-07-2009, 07:43 AM

Easy Rider Re: Install a 16 Tooth Front... 04-07-2009, 10:41 AM

David Bo Re: Install a 16 Tooth Front... 04-07-2009, 02:06 PM

Easy Rider Re: Install a 16 Tooth Front... 04-07-2009, 11:47 PM

DBD Re: Install a 16 Tooth Front... 06-30-2009, 09:47 AM

tommygun Re: Install a 16 Tooth Front... 06-30-2009, 03:10 PM

tommygun Re: Install a 16 Tooth Front... 06-30-2009, 03:14 PM

DBD Re: Install a 16 Tooth Front... 07-01-2009, 04:00 PM

Easy Rider Re: Install a 16 Tooth Front... 07-01-2009, 04:27 PM

gripped Re: Install a 16 Tooth Front... 08-22-2009, 02:24 AM

Water Warrior 2 Re: Install a 16 Tooth Front... 08-22-2009, 08:30 AM

blaine Re: Install a 16 Tooth Front... 02-12-2010, 11:11 PM

alantf Re: Install a 16 Tooth Front... 02-13-2010, 05:45 AM

primal Re: Install a 16 Tooth Front... 03-13-2010, 09:28 PM

Atlus Re: Install a 16 Tooth Front... 03-23-2010, 08:26 PM

JWR Re: Install a 16 Tooth Front... 03-23-2010, 08:45 PM

Atlus Re: Install a 16 Tooth Front... 03-23-2010, 08:56 PM

Atlus Re: Install a 16 Tooth Front... 03-23-2010, 09:00 PM

JWR Re: Install a 16 Tooth Front... 03-23-2010, 09:00 PM

Atlus Re: Install a 16 Tooth Front... 03-24-2010, 11:30 AM

Easy Rider Re: Install a 16 Tooth Front... 03-24-2010, 12:25 PM

JWR Re: Install a 16 Tooth Front... 03-24-2010, 02:41 PM

Atlus Re: Install a 16 Tooth Front... 03-24-2010, 07:06 PM

JWR Re: Install a 16 Tooth Front... 03-24-2010, 08:53 PM

Atlus Re: Install a 16 Tooth Front... 05-01-2010, 05:38 PM

JWR Re: Install a 16 Tooth Front... 05-01-2010, 06:13 PM

Easy Rider Re: Install a 16 Tooth Front... 05-01-2010, 06:19 PM

blaine Re: Install a 16 Tooth Front... 05-01-2010, 07:02 PM

BillInGA Re: Install a 16 Tooth Front... 05-01-2010, 07:24 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 05-01-2010, 08:22 PM

Atlus Re: Install a 16 Tooth Front... 05-01-2010, 10:26 PM

blaine Re: Install a 16 Tooth Front... 05-01-2010, 10:40 PM

Atlus Re: Install a 16 Tooth Front... 05-02-2010, 11:27 PM

blaine Re: Install a 16 Tooth Front... 05-02-2010, 11:58 PM

Easy Rider Re: Install a 16 Tooth Front... 05-03-2010, 12:00 AM

EddieSC Re: Install a 16 Tooth Front... 05-08-2010, 01:15 AM

blaine Re: Install a 16 Tooth Front... 05-08-2010, 07:30 AM

brucea Re: Install a 16 Tooth Front... 07-18-2010, 06:46 PM

nautec Re: Install a 16 Tooth Front... 07-22-2010, 08:12 PM

blaine Re: Install a 16 Tooth Front... 07-22-2010, 09:07 PM

Easy Rider Re: Install a 16 Tooth Front... 07-22-2010, 09:52 PM

nautec Re: Install a 16 Tooth Front... 07-23-2010, 12:16 PM

alantf Re: Install a 16 Tooth Front... 07-23-2010, 12:27 PM

Easy Rider Re: Install a 16 Tooth Front... 07-23-2010, 12:37 PM

nautec Re: Install a 16 Tooth Front... 07-23-2010, 04:09 PM

Easy Rider Re: Install a 16 Tooth Front... 07-23-2010, 05:20 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 07-23-2010, 05:57 PM

cayuse Re: Install a 16 Tooth Front... 07-24-2010, 03:08 AM

blaine Re: Install a 16 Tooth Front... 07-24-2010, 07:04 AM

aboes81 Re: Install a 16 Tooth Front... 08-09-2010, 06:07 PM

Easy Rider Re: Install a 16 Tooth Front... 08-09-2010, 07:22 PM

blaine Re: Install a 16 Tooth Front... 08-09-2010, 07:30 PM

aboes81 Re: Install a 16 Tooth Front... 08-10-2010, 10:28 AM

Easy Rider Re: Install a 16 Tooth Front... 08-10-2010, 01:35 PM

nautec Re: Install a 16 Tooth Front... 08-10-2010, 03:26 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 08-13-2010, 04:58 AM

Easy Rider Re: Install a 16 Tooth Front... 08-13-2010, 10:06 AM

Water Warrior 2 Re: Install a 16 Tooth Front... 08-14-2010, 04:15 AM

Purpledrank Re: Install a 16 Tooth Front... 08-31-2010, 11:21 PM

ncff07 Re: Install a 16 Tooth Front... 08-31-2010, 11:47 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 09-01-2010, 12:14 AM

Purpledrank Re: Install a 16 Tooth Front... 09-01-2010, 12:51 AM

blaine Re: Install a 16 Tooth Front... 09-01-2010, 07:42 AM

Easy Rider Re: Install a 16 Tooth Front... 09-01-2010, 09:21 AM

alantf Re: Install a 16 Tooth Front... 09-01-2010, 09:31 AM

Purpledrank Re: Install a 16 Tooth Front... 09-01-2010, 10:19 AM

3-D Video Re: Install a 16 Tooth Front... 09-01-2010, 10:41 AM

Purpledrank Re: Install a 16 Tooth Front... 09-01-2010, 01:50 PM

blaine Re: Install a 16 Tooth Front... 09-01-2010, 04:15 PM

Easy Rider Re: Install a 16 Tooth Front... 09-01-2010, 05:09 PM

Purpledrank Re: Install a 16 Tooth Front... 09-01-2010, 06:19 PM

JWR Re: Install a 16 Tooth Front... 09-01-2010, 06:35 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 09-01-2010, 07:32 PM

Easy Rider Re: Install a 16 Tooth Front... 09-01-2010, 08:04 PM

Easy Rider Re: Install a 16 Tooth Front... 09-01-2010, 08:07 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 09-02-2010, 01:48 AM

mrlmd1 Re: Install a 16 Tooth Front... 09-02-2010, 09:55 AM

aspirin Re: Install a 16 Tooth Front... 12-08-2010, 11:32 PM

blaine Re: Install a 16 Tooth Front... 12-09-2010, 12:10 AM

Water Warrior 2 Re: Install a 16 Tooth Front... 12-09-2010, 12:34 AM

Slagugglan Re: Install a 16 Tooth Front... 09-29-2011, 02:44 PM

ucvro1 Re: Install a 16 Tooth Front... 10-08-2011, 06:57 PM

Slagugglan Re: Install a 16 Tooth Front... 10-11-2011, 11:42 AM

ucvro1 Re: Install a 16 Tooth Front... 10-11-2011, 05:58 PM

blaine Re: Install a 16 Tooth Front... 10-11-2011, 06:36 PM

cayuse Re: Install a 16 Tooth Front... 10-11-2011, 11:31 PM

ucvro1 Re: Install a 16 Tooth Front... 10-12-2011, 08:09 PM

jonathan180iq Re: Install a 16 Tooth Front... 10-13-2011, 01:40 PM

ucvro1 Re: Install a 16 Tooth Front... 11-07-2011, 01:28 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 11-08-2011, 02:15 AM

ucvro1 Re: Install a 16 Tooth Front... 11-08-2011, 06:58 AM

ironhead1530 Re: Install a 16 Tooth Front... 04-05-2012, 08:17 PM

alantf Re: Install a 16 Tooth Front... 04-06-2012, 05:30 AM

Water Warrior 2 Re: Install a 16 Tooth Front... 04-06-2012, 01:07 PM

cibolorider 16 tooth sprocket 05-06-2012, 08:33 PM

Skunkhome Re: Install a 16 Tooth Front... 05-11-2012, 01:42 AM

bpdchief Re: Install a 16 Tooth Front... 05-21-2012, 05:43 PM

Thumperville Re: Install a 16 Tooth Front... 06-18-2012, 12:49 AM

jonathan180iq Re: Install a 16 Tooth Front... 06-18-2012, 08:18 AM

Skunkhome Re: Install a 16 Tooth Front... 06-19-2012, 08:14 AM

cayuse Re: Install a 16 Tooth Front... 06-19-2012, 01:31 PM

jonathan180iq Re: Install a 16 Tooth Front... 06-19-2012, 02:39 PM

Skunkhome Re: Install a 16 Tooth Front... 06-19-2012, 05:06 PM

Thumperville Re: Install a 16 Tooth Front... 06-19-2012, 07:32 PM

cayuse Re: Install a 16 Tooth Front... 06-20-2012, 01:53 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 06-22-2012, 06:30 AM

bmw633 Re: Install a 16 Tooth Front... 12-15-2012, 02:08 PM

jonathan180iq Re: Install a 16 Tooth Front... 12-17-2012, 08:40 AM

Fawlty Re: Install a 16 Tooth Front... 01-23-2013, 01:28 PM

jonathan180iq Re: Install a 16 Tooth Front... 01-23-2013, 02:32 PM

dhamby Re: Install a 16 Tooth Front... 04-15-2013, 01:05 AM

jonathan180iq Re: Install a 16 Tooth Front... 04-15-2013, 08:13 AM

dhamby Re: Install a 16 Tooth Front... 04-15-2013, 12:04 PM

jonathan180iq Re: Install a 16 Tooth Front... 04-15-2013, 02:56 PM

anruari Re: Install a 16 Tooth Front... 06-01-2013, 05:51 PM

JWR Re: Install a 16 Tooth Front... 06-01-2013, 07:07 PM

Water Warrior 2 Re: Install a 16 Tooth Front... 06-01-2013, 09:13 PM

alantf Re: Install a 16 Tooth Front... 06-02-2013, 03:33 AM

jonathan180iq Re: Install a 16 Tooth Front... 06-03-2013, 08:22 AM

anruari Re: Install a 16 Tooth Front... 06-06-2013, 01:11 PM

raul10141964 Re: Install a 16 Tooth Front... 06-06-2013, 01:38 PM

jonathan180iq Re: Install a 16 Tooth Front... 06-06-2013, 01:41 PM

anruari Re: Install a 16 Tooth Front... 06-06-2013, 07:41 PM

jonathan180iq Re: Install a 16 Tooth Front... 06-07-2013, 08:20 AM

Maggie Re: Install a 16 Tooth Front... 06-09-2013, 12:01 AM

jbaird Re: Install a 16 Tooth Front... 07-21-2013, 01:24 AM

bwader Re: 09-24-2013, 08:03 AM

bwader Re: Install a 16 Tooth Front... 09-24-2013, 11:47 AM

bwader Re: Install a 16 Tooth Front... 09-28-2013, 12:58 AM

Water Warrior 2 Re: Install a 16 Tooth Front... 09-28-2013, 01:09 AM

bwader Re: Install a 16 Tooth Front... 09-28-2013, 01:14 AM

steelpix Re: Install a 16 Tooth Front... 09-28-2013, 10:32 AM

Prev

Previous Post

Next Post

Next

05-08-2010, 07:30 AM	#11
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Install a 16 Tooth Front Sprocket welcome to the fourm.try the 16t,not a big deal to change back if you don't like it. __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 07:25 AM.