Hello from Aberdeen, Scotland

wnderer · 10-11-2015, 07:56 AM

thanks for the add, I have returned to biking after a break of 30 years, my bike is a Yamaha sr 125, my bike/project of choice for when i pass my test is a 2005 Jinlun JL 250 Marauder which I'm led to believe is a clone of the GZ250 fitted with a cloned Honda engine, but I could be wrong, the bike needs a rebuild having been neglected for some time, the plan is to strip it down to the frame & rust treat it & get rid of the flaky cheap chrome, parts needed so far are forks (rusted only found after removing the covers), side casings (missing), exhaust (rusted thru), ignition switch, i also plan on swapping the wiring harness for a GZ one as the JL only has one fuse on the whole bike

10-11-2015, 07:56 AM	#1
wnderer Junior Member Join Date: Oct 2015 Posts: 3	Hello from Aberdeen, Scotland thanks for the add, I have returned to biking after a break of 30 years, my bike is a Yamaha sr 125, my bike/project of choice for when i pass my test is a 2005 Jinlun JL 250 Marauder which I'm led to believe is a clone of the GZ250 fitted with a cloned Honda engine, but I could be wrong, the bike needs a rebuild having been neglected for some time, the plan is to strip it down to the frame & rust treat it & get rid of the flaky cheap chrome, parts needed so far are forks (rusted only found after removing the covers), side casings (missing), exhaust (rusted thru), ignition switch, i also plan on swapping the wiring harness for a GZ one as the JL only has one fuse on the whole bike Login or Register to Remove Ads Last edited by wnderer; 10-11-2015 at 08:00 AM.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode