04-26-2014, 01:13 AM | #11 | |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Quote:
Many top boxes come with a mounting plate, some don't. I mounted the mounting plate to a steel plate on the bike and it stayed there but the box could be unlocked and removed from the bike. The steel plate was secured using the 3 bolt holes for the passenger seat so no extra drilling or modding was needed. Note: the back pad is likely not needed on the front of the top box for most riders. Lynda is only 5 foot 3 inches and needed a little help by spacing the backrest further forward. The box could not go anymore forward without hindering the driver's seat removal. I did a lot of measuring and planning before the job and was thrilled that it was 99% perfect with no do overs needed. Login or Register to Remove Ads |
|
|
Thread Tools | |
Display Modes | |
|
|