Generator / Rotor Bolts - Sheared and Damaged

clofan · 03-15-2014, 07:20 PM

Fixed it! Or at least, well on the way.

Unclogged the oil passageway, and used some JB Weld to patch it:

New bolts, WITH blue threadlocker:

My day's 'Workstation':

I buttoned it back up, and it started up! Killed it because I need to 1) charge the battery, 2) change the oil, and 3) let the weld cure. So, hopefully tomorrow I'll be riding!.

03-15-2014, 07:20 PM	#13
clofan Junior Member Join Date: Mar 2014 Posts: 29	Fixed it! Or at least, well on the way. Unclogged the oil passageway, and used some JB Weld to patch it: New bolts, WITH blue threadlocker: My day's 'Workstation': I buttoned it back up, and it started up! Killed it because I need to 1) charge the battery, 2) change the oil, and 3) let the weld cure. So, hopefully tomorrow I'll be riding!. Login or Register to Remove Ads Last edited by clofan; 03-15-2014 at 08:03 PM.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode