03-29-2013, 12:07 PM | #1 |
Junior Member
Join Date: Mar 2013
Location: United Kingdom
Posts: 7
|
Electrical trouble with a GZ125
I have a 2003 GZ125 (everything identical to the GZ250 besides the engine) and here is the problem I am having:
I started it up, everything working perfectly, and drove 5 miles. 8 hours later I tried to start it and nothing happened when I pressed the starter. I checked all the switches, but no obvious problems. I checked the Starter Solenoid, and found the fuse was blown but was the wrong size (30A instead of 20A). I changed the fuse, no fix. I replaced the Solenoid itself, no fix. I then manually connected the Solenoid contacts and it started up. Everything was working fine, including all electrical components. I drove it home, 5 miles, and found that the battery had exhausted(down to about 10v) to the point that it would not start again. I am at a total loss as to what would cause these problems. There are no obvious/visible faults with any of the wiring. I can get used parts rather easily and affordably, but I am not sure what I need to replace. Any suggestions as to what would cause this? EDIT: Above, Battery was at 10v when I returned home. Login or Register to Remove Ads |
|
Thread Tools | |
Display Modes | |
|
|