My Ammo Box project

IndyGoat · 06-13-2012, 08:05 PM

Wanted a little bit of storage. Something to throw gloves, a hat, and a little this and that if I ran to the store.

Did a bunch of research on this site and the net and came up with this.

One ammo box, SAW

Two extended bolts

Two lock washers, washers, nuts

Two large rubber gaskets, and two smaller

Two 5" by 1" L brackets.

The large gaskets are to protect the chrome from the L brackets, the small ones are inside the box to prevent water from coming in.

So far about 400 miles with it, no problems, knock on wood

Need to glue down handle, it is beginning to drive me nuts

06-13-2012, 08:05 PM	#1
IndyGoat Junior Member Join Date: Apr 2012 Location: Fishers,IN Posts: 12	My Ammo Box project Wanted a little bit of storage. Something to throw gloves, a hat, and a little this and that if I ran to the store. Did a bunch of research on this site and the net and came up with this. One ammo box, SAW Two extended bolts Two lock washers, washers, nuts Two large rubber gaskets, and two smaller Two 5" by 1" L brackets. The large gaskets are to protect the chrome from the L brackets, the small ones are inside the box to prevent water from coming in. So far about 400 miles with it, no problems, knock on wood Need to glue down handle, it is beginning to drive me nuts __________________ Stay safe, go home at night Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode