4 day weekend

Water Warrior 2 · 10-07-2007, 10:59 PM

Badbob, the trunk mount was quite easy. Remove the pillion seat, retained the front bracket for the pillion and used a piece of flat plate to mount the trunk mounting plate on. Had a metal shop cut it to size and bend the rear of the plate( approx 1 inch) at an angle to match the mounting bolt of the rear fender. Check bike mods for March 22 for a pic of the trunk and mounting plate.

10-07-2007, 10:59 PM	#11
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Badbob, the trunk mount was quite easy. Remove the pillion seat, retained the front bracket for the pillion and used a piece of flat plate to mount the trunk mounting plate on. Had a metal shop cut it to size and bend the rear of the plate( approx 1 inch) at an angle to match the mounting bolt of the rear fender. Check bike mods for March 22 for a pic of the trunk and mounting plate. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode