Start-Up / Loss of Power Problems - HELP!!!

mrlmd1 · 12-21-2009, 07:26 PM

Leave the damn PRIME setting alone, don't touch it unless the bike sits for MONTHS. That is not your solution and possibly is your problem. I have had the bike sitting for way over a month and it starts instantly without resorting to PRIME. Leave that alone. Like I told you before, you only put that on for 30 sec-1 min to fill the carb bowl, then turn it off back to RUN. You are not helping anything leaving it on there and are probably flooding the carb, plus dripping gas all over the floor.

12-21-2009, 07:26 PM	#21
mrlmd1 Senior Member Join Date: Jan 2008 Location: Crawfordville, Florida Posts: 2,853	Re: Start-Up / Loss of Power Problems - HELP!!! Leave the damn PRIME setting alone, don't touch it unless the bike sits for MONTHS. That is not your solution and possibly is your problem. I have had the bike sitting for way over a month and it starts instantly without resorting to PRIME. Leave that alone. Like I told you before, you only put that on for 30 sec-1 min to fill the carb bowl, then turn it off back to RUN. You are not helping anything leaving it on there and are probably flooding the carb, plus dripping gas all over the floor. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode