Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-04-2009, 01:40 AM   #11
DSmithjr
Junior Member
 
Join Date: May 2009
Location: Arizona
Posts: 20
Re: HOT HOT engine

If you take a look at the manual on page 2-19, it outlines how you can do an oil pressure check on your motor. If you're afraid you're not getting proper oil circulation, that would probably be a good place to start.

From the manual:

"OIL PRESSURE CHECK
Check the oil pressure periodically. This will give a good indication of the condition of the moving parts.

OIL PRESSURE SPECIFICATION Above 30 kPa (0.3 kg/cm2, 4.3 psi) Below 70 kPa (0.7 kg/cm2, 10.0 psi)
at 3 000 r/min., Oil temp, at 60°C (140°F)

If the oil pressure is lower or higher than the specification, the following causes may be considered. LOW OIL PRESSURE
* Clogged oil filter
* Oil leakage from the oil passage
* Damaged O-ring
* Defective oil pump
* Combination of the above items
HIGH OIL PRESSURE
* Engine oil viscosity is too high
* Clogged oil passage
* Combination of the above items"



Login or Register to Remove Ads
DSmithjr is offline  
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.