Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-24-2009, 03:35 AM   #1
masterkeosk
Junior Member
 
Join Date: Apr 2009
Location: cincinnati, oh
Posts: 8
Send a message via AIM to masterkeosk
starting and backfire problems

I have an '03 GZ that I got from a friend that let it sit for about two years. I ran some gumout and some berryman's b12 through some new gas and new spark plug and it's up and running mostly. The first few times I had to spray the air filter with starter fluid to get the bike to start. I don't have to do that now since I've ridden it a few times. However it takes awhile to get it running somewhat smoothly without the choke on. It takes a couple tries before it will stay started while giving it gas, after a couple minutes it will idle on it's own with the choke about half way on. A couple minutes later it usually idles fine. Generally at this point I deem it ok to ride without it stalling. It never stalls at this point unless I don't put it into first correctly. THen throughout my ride it will back fire, generally toward the top end of a gear or if the revs are kinda high when I upshift. I did read on a different post that it might just be the idle turned up to high, which I haven't been able to try yet due to rain (YAY cincinnati) I will be trying this in the morning and hope that it works. Sorry for the length I just wanted to give a fairly good explanation of what's going on with the bike and also I tend to get a bit wordy when I've been drinking.



Login or Register to Remove Ads
masterkeosk is offline  
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.