Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-02-2007, 12:53 AM   #23
1Rogue
Member
 
Join Date: May 2007
Location: Sachse, TX
Posts: 41
Well I did it...
I replaced the spark plug (the original in there was very loose so I thought that might be the the skipping problem). Broke down the entire carb and cleaned it, as well as adjusted the float level. Changed to a 16t sprocket. Did the needle shim. And Finally sprayed out the petcock screens with air to make sure they were clean.

I got it out on the road and couldn't get it over 35. So I broke it back down and found the edge of diaphragm was kinked and put it all back together

I hit the road got it up into 5th gear and... it is still skipping. :cuss: So, I just got home kicked the tires a few times and said a few (ok, alot) choice words at it and gave up. There is a bike shop in the next town over I may take it to. Hopefully they can find find the problem and it will be cheap. Can't afford to spend much more on it till next month. I think I've gotten and addressed everyone's ideas and I just don't have a clue what else it could be unless it is electrical and then I am really clueless.

Jonathan - your measurements are: 16.2 cm around the outside and 5 cm across the center.



Login or Register to Remove Ads
1Rogue is offline  
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.