Clutch Release Arm has no tension.

rolis12 · 10-02-2014, 09:58 PM

Hi im new to this bike and forum

As usual my first post is about a problem I cant sort out after hours of research.

I have a 07 that I snapped the clutch cable after putting on shorter handlebars.
Like dumb but i can fix that and reroute the cable.

Heres the problem, the clutch release lever on the engine is completely loose and has no tension. It doesnt spin around but no resistance or spring closed. It opens and closes the clutch still but no retract to closed. Is this normal?

Did I break something in clutch, release rod or something else? The clutch still works as i can put her in gear and not be able to roll & opposite in neutral.
Looking at the service manual, posts on here, and the internet i cant seem to make sense of where i need to go or what i may have broken.

Any help is appreciated.

Thanks!

.

raul10141964 · 10-02-2014, 10:30 PM

is normal

rolis12 · 10-02-2014, 10:35 PM

^^^THANK YOU! I was so worried!

rolis12 · 10-08-2014, 02:36 AM

New cable installed and (i dont have to tell you, but) IT WORKS!
Thank you for being kind to this noble idiot.

5th_bike · 10-10-2014, 01:34 AM

You're not an idiot. You were just worried. Is normal too.

Do keep some play in the cable, i.e. your clutch lever should flop around freely say 5-10 mm at its end.

rolis12 · 10-11-2014, 02:59 AM

^Will do and Thank you! This forum is awesome!

10-02-2014, 09:58 PM	#1
rolis12 Junior Member Join Date: Sep 2014 Posts: 4	Clutch Release Arm has no tension. Hi im new to this bike and forum As usual my first post is about a problem I cant sort out after hours of research. I have a 07 that I snapped the clutch cable after putting on shorter handlebars. Like dumb but i can fix that and reroute the cable. Heres the problem, the clutch release lever on the engine is completely loose and has no tension. It doesnt spin around but no resistance or spring closed. It opens and closes the clutch still but no retract to closed. Is this normal? Did I break something in clutch, release rod or something else? The clutch still works as i can put her in gear and not be able to roll & opposite in neutral. Looking at the service manual, posts on here, and the internet i cant seem to make sense of where i need to go or what i may have broken. Any help is appreciated. Thanks! . Login or Register to Remove Ads
	0

10-02-2014, 10:35 PM	#3
rolis12 Junior Member Join Date: Sep 2014 Posts: 4	^^^THANK YOU! I was so worried! Login or Register to Remove Ads
	0

10-10-2014, 01:34 AM	#5
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	You're not an idiot. You were just worried. Is normal too. Do keep some play in the cable, i.e. your clutch lever should flop around freely say 5-10 mm at its end. __________________ 2005 "Saturn Black", stock + tach Login or Register to Remove Ads
	0

10-02-2014, 10:30 PM	#2
raul10141964 Senior Member Join Date: Apr 2012 Location: Elkhart, Indiana Posts: 369	is normal
	0

10-08-2014, 02:36 AM	#4
rolis12 Junior Member Join Date: Sep 2014 Posts: 4	New cable installed and (i dont have to tell you, but) IT WORKS! Thank you for being kind to this noble idiot.
	0

10-11-2014, 02:59 AM	#6
rolis12 Junior Member Join Date: Sep 2014 Posts: 4	^Will do and Thank you! This forum is awesome!
	0