Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 02-28-2013, 04:43 PM   #1
FLAJIM
Member
 
Join Date: Apr 2011
Location: Daytona Beach
Posts: 87
16T sprocket install question

Ok, I have the Suzuki 16T sprocket and installed it today. Very happy, does just what ever one says. My question, what size goes towards the motor ??? The OEM looks different besides the rubber. The 16T, on the "number side" had a 1/2 inch flat collar that looks like it went towards the motor so thats what I did. Is this correct ?? does it matter ?? Thanks in advance JIM



Login or Register to Remove Ads
FLAJIM is offline  
Reply With Quote
Old 03-01-2013, 09:55 AM   #2
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Re: 16T sprocket install question

I'm going to have to go back through my old photo archives and update the how-to with working photos again.

I don't remember specifically, so I can't correctly answer your question. If the photos were working, they would resolve any questions. But It seemed that I did whatever was logical at the time. If it looked like it was supposed to go on the inside, you probably did it right.
jonathan180iq is offline  
Reply With Quote
Old 03-01-2013, 12:56 PM   #3
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: 16T sprocket install question

IIRC if you put the sprocket on backwards than the chain will not run straight.
:cool:
__________________
If at first you do succeed, try not to look surprised.





Login or Register to Remove Ads
blaine is offline  
Reply With Quote
Old 03-01-2013, 01:00 PM   #4
FLAJIM
Member
 
Join Date: Apr 2011
Location: Daytona Beach
Posts: 87
Re: 16T sprocket install question

Quote:
Originally Posted by blaine
IIRC if you put the sprocket on backwards than the chain will not run straight.
:cool:
OK do you know which way is right. when I checked the sprocket sat the same distance from the motor both ways. I really want to get it right before I put any miles on it to prevent any problems.

Thanks in advance
FLAJIM is offline  
Reply With Quote
Old 03-01-2013, 02:04 PM   #5
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: 16T sprocket install question

Quote:
Originally Posted by FLAJIM
Quote:
Originally Posted by blaine
IIRC if you put the sprocket on backwards than the chain will not run straight.
:cool:
OK do you know which way is right. when I checked the sprocket sat the same distance from the motor both ways. I really want to get it right before I put any miles on it to prevent any problems.

Thanks in advance
If it's the same distance than it won't make any difference.
:2tup:
__________________
If at first you do succeed, try not to look surprised.





Login or Register to Remove Ads
blaine is offline  
Reply With Quote
Old 03-03-2013, 03:25 PM   #6
FLAJIM
Member
 
Join Date: Apr 2011
Location: Daytona Beach
Posts: 87
Re: 16T sprocket install question

Quote:
Originally Posted by jonathan180iq
I'm going to have to go back through my old photo archives and update the how-to with working photos again.

I don't remember specifically, so I can't correctly answer your question. If the photos were working, they would resolve any questions. But It seemed that I did whatever was logical at the time. If it looked like it was supposed to go on the inside, you probably did it right.
Any pics yet ???
FLAJIM is offline  
Reply With Quote
Old 03-04-2013, 10:52 AM   #7
jonathan180iq
Super Moderator
 
jonathan180iq's Avatar
 
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
Re: 16T sprocket install question

No. I made an archive photo account at one point for the entire site and it was dismantled because of disuse... I'm still pouring through my old personal photos. I'll come across them soon. Never fear. Blaine is right though. There should be only one way that works. If it's the same both ways, then you have nothing to worry about.
jonathan180iq is offline  
Reply With Quote
Old 03-05-2013, 11:28 AM   #8
FLAJIM
Member
 
Join Date: Apr 2011
Location: Daytona Beach
Posts: 87
Re: 16T sprocket install question

OK, sounds good but it you ever find the picture I would really like to see it.

Thanks again, Be Safe JIM
FLAJIM is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.