Exhaust / tail pipe - Page 2

geezer · 07-12-2011, 01:19 AM

carbs have 3 circuits, wide open throttle , part throttle and idle. you know what, just wait a few days and ill give you your answer in a good write up

Black Warrior · 07-12-2011, 01:54 PM

@Dupo. Im putting exactly the same bike as in your mod

I wanted to have everything being just perfect, so I took my time, but 130 Jet was just fine! - i'm running extremely rich though! (It's not a complain, just a fact). Also for starters I put a couple of washers to shim the needle so my bike behaved weirdly - it had a very good response from 40-85 km/h, but other than that - brrrr.....

07-12-2011, 01:19 AM	#11
geezer Senior Member Join Date: Mar 2011 Location: dahlonega GA Posts: 563	Re: Exhaust / tail pipe carbs have 3 circuits, wide open throttle , part throttle and idle. you know what, just wait a few days and ill give you your answer in a good write up __________________ 99 gz 250 and a currently dismantled fzr 1000 Login or Register to Remove Ads
	0

07-12-2011, 01:54 PM	#12
Black Warrior Member Join Date: Apr 2011 Location: Canada, ON Posts: 37	Re: Exhaust / tail pipe @Dupo. Im putting exactly the same bike as in your mod I wanted to have everything being just perfect, so I took my time, but 130 Jet was just fine! - i'm running extremely rich though! (It's not a complain, just a fact). Also for starters I put a couple of washers to shim the needle so my bike behaved weirdly - it had a very good response from 40-85 km/h, but other than that - brrrr.....
	0