First pics after pulling it in the shop

Dickey · 04-18-2011, 02:51 AM

2001 - bought it used and haven't changed anything yet. Currently on the way are some riser extensions though as the drag bars hit the tank and I don't want to commit to any real purchases before I've determined a good direction for the bike. Previous owner did the drilling to the muffler. I had not realized that wasn't a standard issue detail until reading on this forum. I've got a welder though and fully intend to correct that. If an engine displaces less than 6 liters or won't turn more than 10k rpm, nobody benefits with it making a lot of racket.

mole2 · 04-18-2011, 05:35 AM

What's that car in front of it? Is that a Troy Bilt Junior (I own one...I put a new motor in it three years ago. It's over 20 years old and I'm the original owner)?

**jonathan180iq** · 04-18-2011, 10:25 AM

It can't be a Delorean.... too skinny.
I want to know too!

Dickey · 04-18-2011, 10:40 AM

Nah, that's my DeLorean.

//that is my friend's Troy Built tiller. We're putting in a new garden and he loaned it to me. My current mower is the Murray lawnmower that my father bought from Wal-Mart in 1988. I've rebuilt the carburetor once several years back but aside from an ignition issue that just cropped up last week, I've not had any issue with it. I'll tear it down and replace the shaft key and test the ignitor when I get time later on this week or so.

bonehead · 04-18-2011, 12:49 PM

Ya, I had problems with my mower and weedeater at the start of the season,
they BOTH started.

Dickey · 04-18-2011, 01:35 PM

Quote:

Originally Posted by bonehead

Ya, I had problems with my mower and weedeater at the start of the season,
they BOTH started.

hehe, I'm stealing that. You may or may not get credit.

bonehead · 04-18-2011, 02:29 PM

Quote:

Originally Posted by Dickey

Quote:

Originally Posted by bonehead

Ya, I had problems with my mower and weedeater at the start of the season,
they BOTH started.

hehe, I'm stealing that. You may or may not get credit.

It is copyrighted. :cool:
BTW: Like the Time Machine.

**jonathan180iq** · 04-18-2011, 05:10 PM

....beautiful.
Favorite car ever.

Water Warrior 2 · 04-18-2011, 09:23 PM

Quote:

Originally Posted by jonathan180iq

It can't be a Delorean.... too skinny.
I want to know too!

The license plate is a dead give away.

**jonathan180iq** · 04-19-2011, 09:21 AM

Couldn't read it in the first two pictures.
Custom liscense plates can say anything - assuming that first letter is a "W" would have just been wishful thinking.

Dickey, is your car complete with Flux Capacitor?

04-18-2011, 02:51 AM	#1
Dickey Junior Member Join Date: Apr 2011 Location: Chapin, SC Posts: 29	First pics after pulling it in the shop 2001 - bought it used and haven't changed anything yet. Currently on the way are some riser extensions though as the drag bars hit the tank and I don't want to commit to any real purchases before I've determined a good direction for the bike. Previous owner did the drilling to the muffler. I had not realized that wasn't a standard issue detail until reading on this forum. I've got a welder though and fully intend to correct that. If an engine displaces less than 6 liters or won't turn more than 10k rpm, nobody benefits with it making a lot of racket. Login or Register to Remove Ads
	0

04-18-2011, 05:35 AM	#2
mole2 Senior Member Join Date: Dec 2009 Location: Longs, SC Posts: 1,469	Re: First pics after pulling it in the shop What's that car in front of it? Is that a Troy Bilt Junior (I own one...I put a new motor in it three years ago. It's over 20 years old and I'm the original owner)? __________________ 2009 V-Star 650 Silverado Pearl White 2007 Suzuki GZ250 Black (sold)
	0

04-18-2011, 10:25 AM	#3
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: First pics after pulling it in the shop It can't be a Delorean.... too skinny. I want to know too! Login or Register to Remove Ads
	0

04-18-2011, 10:40 AM	#4
Dickey Junior Member Join Date: Apr 2011 Location: Chapin, SC Posts: 29	Re: First pics after pulling it in the shop Nah, that's my DeLorean. //that is my friend's Troy Built tiller. We're putting in a new garden and he loaned it to me. My current mower is the Murray lawnmower that my father bought from Wal-Mart in 1988. I've rebuilt the carburetor once several years back but aside from an ignition issue that just cropped up last week, I've not had any issue with it. I'll tear it down and replace the shaft key and test the ignitor when I get time later on this week or so.
	0

04-18-2011, 12:49 PM	#5
bonehead Senior Member Join Date: May 2009 Location: elgin,tx Posts: 907	Re: First pics after pulling it in the shop Ya, I had problems with my mower and weedeater at the start of the season, they BOTH started. __________________ Standing with the PGR until they stand for me. Login or Register to Remove Ads
	0

04-18-2011, 05:10 PM	#8
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: First pics after pulling it in the shop ....beautiful. Favorite car ever.
	0

04-19-2011, 09:21 AM	#10
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: First pics after pulling it in the shop Couldn't read it in the first two pictures. Custom liscense plates can say anything - assuming that first letter is a "W" would have just been wishful thinking. Dickey, is your car complete with Flux Capacitor?
	0