Bike wont start!/ fouling plugs?

[blaine]

Originally Posted by feltner58

Where would it most likely be sticking it only idles high after I give it gas, could it be in the carb

Possible,but not likely.As stated you have a cable binding.When you say"it only idles high after i give it gas" reinforces that.If you unhook the cables at the carb,you should be able to tell which cable is binding.Also you will be able to see if the bike will idle & rev freely without the cables hooked up, eliminating the carb as the problem.
:cool:

[Water Warrior 2]

What Blaine said. You might also want to check for a vacuum leak. That can give you a fast idle too.

[feltner58]

Removed both throttle cables, throttle is disabled, stills idles way high but only when i turn the throttle, choke sticking maybe? help

[blaine]

Originally Posted by feltner58

Removed both throttle cables, throttle is disabled, stills idles way high but only when i turn the throttle, choke sticking maybe? help

Did you check for a vacuum leak? Just unhook the choke and try it, its possible that it may be sticking.
:cool:

[alantf]

Originally Posted by feltner58

Removed both throttle cables, throttle is disabled, stills idles way high but only when i turn the throttle,

If you removed both throttle cables, and disabled the throttle, how can you turn the throttle grip & make it work????

[blaine]

Originally Posted by alantf

If you removed both throttle cables, and disabled the throttle, how can you turn the throttle grip & make it work????

I think he means when he revvs it from the side of the carb.
:2tup: :cool:

[feltner58]

There is still a throttle directly on the carb

[alantf]

Ah....... My mistake :blush:

[feltner58]

Any ideas of what it may be?

[alantf]

It would appear to be something sticking in the carb. How's your skills at stripping the carb? Or would you be happier letting the shop do it for you? Either way, it seems like it needs doing straight away.