Handle Bars - Page 2

blaine · 03-01-2011, 04:23 PM

There are lots of 7/8 bars in different heights and styles to suit your preference.I would not touch them adapters with a ten foot pole.Also as mentioned you still need to change all the controls.
:cool:

Shammua · 03-01-2011, 05:28 PM

Now that I know about the bars being 7/8" I have done a search for those and found a TON of bars for the correct size, which is exactly what I was looking for.

Now can anyone recommend a decent width for the bars to go with on a bobber style? I don't know if the 28" is to long, to short, or will it cause clearence issues until I get a different tank?

Sham

alantf · 03-01-2011, 06:37 PM

The way to find out which bars are right for you is to sit on the bike, close your eyes, hold out your arms until you feel comfortable,then open your eyes & see where your hands are in relation to your current bars. That way you'll be able to see how much difference you need. There are no hard & fast rules. It all depends on your individual size. :2tup:

Water Warrior 2 · 03-02-2011, 02:29 AM

Go to Flanders Handlebars for info on bar measurements. Look up the GZ first and then compare other bar dimensions. There is a very good chart and info explaining dimensions. You don't have to buy from them but you can use the info to look for what you want.

Shammua · 03-02-2011, 12:01 PM

For the most part the bars I have been looking at are consitantly 28.5" wide so as long as I am not having clearance issues I will most likely be going with those.

Here is an image to the one's I am specifically looking at.

Available from http://cgi.ebay.com/ebaymotors/Dragb...item335f401724

**jonathan180iq** · 03-02-2011, 04:54 PM

Look up Superbike handleabrars in 7/8"

That should fit the style your looking at while not being too drastic.

Vansky · 06-05-2011, 03:34 AM

I just wanted to confirm these would fit our gz250? it says 7/8". If anyone could advise that would be greatly appreciated. Thank you!

http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT

alantf · 06-05-2011, 07:31 AM

Can't see a problem. The ad says 7/8", and that's what the geezer bars are. BTW, nice looking grips. :2tup:

blaine · 06-05-2011, 09:12 AM

Quote:

Originally Posted by alantf

Can't see a problem. The ad says 7/8", and that's what the geezer bars are. BTW, nice looking grips. :2tup:

They will fit.I had the same ones on my G.Z.

:cool:

Vansky · 06-05-2011, 11:55 AM

Hey Blaine,

Did the grips feel larger?

03-01-2011, 04:23 PM	#11
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Re: Handle Bars There are lots of 7/8 bars in different heights and styles to suit your preference.I would not touch them adapters with a ten foot pole.Also as mentioned you still need to change all the controls. :cool: __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0

03-01-2011, 05:28 PM	#12
Shammua Member Join Date: Feb 2011 Location: Virginia Beach, VA. Posts: 79	Re: Handle Bars Now that I know about the bars being 7/8" I have done a search for those and found a TON of bars for the correct size, which is exactly what I was looking for. Now can anyone recommend a decent width for the bars to go with on a bobber style? I don't know if the 28" is to long, to short, or will it cause clearence issues until I get a different tank? Sham
	0

03-01-2011, 06:37 PM	#13
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Handle Bars The way to find out which bars are right for you is to sit on the bike, close your eyes, hold out your arms until you feel comfortable,then open your eyes & see where your hands are in relation to your current bars. That way you'll be able to see how much difference you need. There are no hard & fast rules. It all depends on your individual size. :2tup: __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

03-02-2011, 02:29 AM	#14
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Re: Handle Bars Go to Flanders Handlebars for info on bar measurements. Look up the GZ first and then compare other bar dimensions. There is a very good chart and info explaining dimensions. You don't have to buy from them but you can use the info to look for what you want.
	0

03-02-2011, 12:01 PM	#15
Shammua Member Join Date: Feb 2011 Location: Virginia Beach, VA. Posts: 79	Re: Handle Bars For the most part the bars I have been looking at are consitantly 28.5" wide so as long as I am not having clearance issues I will most likely be going with those. Here is an image to the one's I am specifically looking at. Available from http://cgi.ebay.com/ebaymotors/Dragb...item335f401724 Login or Register to Remove Ads
	0

03-02-2011, 04:54 PM	#16
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Handle Bars Look up Superbike handleabrars in 7/8" That should fit the style your looking at while not being too drastic.
	0

06-05-2011, 03:34 AM	#17
Vansky Member Join Date: Jun 2010 Location: Myrtle Beach, SC Posts: 52	Re: Handle Bars I just wanted to confirm these would fit our gz250? it says 7/8". If anyone could advise that would be greatly appreciated. Thank you! http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT
	0

06-05-2011, 07:31 AM	#18
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Handle Bars Can't see a problem. The ad says 7/8", and that's what the geezer bars are. BTW, nice looking grips. :2tup: __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

06-05-2011, 11:55 AM	#20
Vansky Member Join Date: Jun 2010 Location: Myrtle Beach, SC Posts: 52	Re: Handle Bars Hey Blaine, Did the grips feel larger?
	0