The off-roading bigginer's trail ride report (video) - Lake - Page 2

BusyWeb · 07-14-2010, 10:43 PM

Quote:

Originally Posted by Water Warrior

Busy, start reading dirt bike magazines. You will find a wealth of info and can apply a lot to your riding and bike set-up. Many of the helpful hints are cheap/free with a little thought on your part. A good idea for any bike and especially a dirt oriented bike is to check for any and all loose nuts and bolts. I used to start by stripping the bike of as much plactic and covering as possible for better access. You also learn more by knowing where certain parts are and what they look like clean and undamaged. Lots of fun actually and a sense of accomplishment when all is said and done.

O.K. that's a great idea for me.
I'll go bookstroe and read it while on the shop... ha ha ha
If subscription is not that expensive, let me do subscribe it.
Thanks for the nice infor.

BusyWeb · 07-14-2010, 10:45 PM

Quote:

Originally Posted by cayuse

Beautiful countryside, beautiful movie Busy! Keep it up!

Thanks for the comments.
However, the temperature was beyond of my ability to endure at the last riding.
Even, this weekend would be go more up.... so, I have to prepare against that.

BusyWeb · 07-14-2010, 10:48 PM

Quote:

Originally Posted by ncff07

From a newbies point of view, I like seeing the videos/pictures on here and the hints/pointers that come up in the process helps with the learning process. Don't remember what thread it was on but someone said they had electrical box covers to set the stand on when on asphalt or a soft surface. I went and bought 2 galvanized covers, one in my pack to use and one under the seat as a back up. Along with a couple other things too I picked up on here. :2tup:

Thanks for the galvanized cover info.
And, actually where do I use it for? (ha ha ha getting old... ^^

For quick stand??? or els.... sorry if I misunderstood another ideo for this item?

Water Warrior 2 · 07-15-2010, 01:09 AM

Quote:

Originally Posted by BusyWeb

Quote:

Originally Posted by ncff07

From a newbies point of view, I like seeing the videos/pictures on here and the hints/pointers that come up in the process helps with the learning process. Don't remember what thread it was on but someone said they had electrical box covers to set the stand on when on asphalt or a soft surface. I went and bought 2 galvanized covers, one in my pack to use and one under the seat as a back up. Along with a couple other things too I picked up on here. :2tup:

Thanks for the galvanized cover info.
And, actually where do I use it for? (ha ha ha getting old... ^^

For quick stand??? or els.... sorry if I misunderstood another ideo for this item?

The galvanized cover is put under the side stand when parking on soft ground.

ncff07 · 07-15-2010, 01:39 AM

Quote:

Originally Posted by Water Warrior

Quote:

Originally Posted by BusyWeb

Quote:

Originally Posted by ncff07

From a newbies point of view, I like seeing the videos/pictures on here and the hints/pointers that come up in the process helps with the learning process. Don't remember what thread it was on but someone said they had electrical box covers to set the stand on when on asphalt or a soft surface. I went and bought 2 galvanized covers, one in my pack to use and one under the seat as a back up. Along with a couple other things too I picked up on here. :2tup:

Thanks for the galvanized cover info.
And, actually where do I use it for? (ha ha ha getting old... ^^

For quick stand??? or els.... sorry if I misunderstood another ideo for this item?

The galvanized cover is put under the side stand when parking on soft ground.

Yup what he said. .48 cent a piece at home depot.