Fuel valve

Jam24 · 03-05-2024, 01:00 PM

I have a 2000 Suzuki 250 GZ and I'm new to riding. Unfortunately, I don't have the manual. I noticed the fuel value switch on my bike seems to have 4 settings (I'm including the positions as they would appear on a clock):

On (at 6 o'clock)
Off (at 9)
Fuel (at 5)
Res (at 12)
IMG_1410.jpg

What should I use each of these settings for?

Searching around online, I'm seeing a lot of references to "PRI", but I don't seem to have this.

Any suggestions would be very helpful!

Vegas Street Rider · 03-05-2024, 01:35 PM

The petcock on my 2009 only has three settings. On, Prime, and Reserve. Does your petcock have a vacuum tube on the back of it going to the carburetor? Mine does not allow fuel to flow to the carburetor in the On and Reserve settings unless the carburetor is asking for fuel. If it is set to Prime, then fuel will flow to the carburetor whether the engine is running or not. This setting should only be used if the bike has been sitting for a while when starting and then turned to On once the bike has started.

Being an older bike, I am assuming that your petcock is not vacuum actuated, but I am unclear about that. Perhaps someone with a bike closer in manufacturing date can chime in on that.

Vegas Street Rider · 03-05-2024, 01:53 PM

Just to let you know Jam24, that you can download the manual in PDF format provided by jonathan180iq who is a member of this forum.

www.gz250bike.com/forum/archive/index.php/t-28

Vegas Street Rider · 03-05-2024, 01:56 PM

You can download the manuals on this forum. Go to search bar at the top and type in manual and then scroll down to Dupo's post.

Wijohn · 05-24-2024, 03:31 PM

FYI: From what I have seen the OEM petcock have always been the same (on, primary, reserve). Looks like it was replaced. But if the bike runs ok I would not worry about it.

But do download the manuals, they are a world of info!

03-05-2024, 01:00 PM	#1
Jam24 Junior Member Join Date: Mar 2024 Posts: 1	Fuel valve I have a 2000 Suzuki 250 GZ and I'm new to riding. Unfortunately, I don't have the manual. I noticed the fuel value switch on my bike seems to have 4 settings (I'm including the positions as they would appear on a clock): On (at 6 o'clock) Off (at 9) Fuel (at 5) Res (at 12) IMG_1410.jpg What should I use each of these settings for? Searching around online, I'm seeing a lot of references to "PRI", but I don't seem to have this. Any suggestions would be very helpful! Login or Register to Remove Ads
	0

03-05-2024, 01:53 PM	#3
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Just to let you know Jam24, that you can download the manual in PDF format provided by jonathan180iq who is a member of this forum. www.gz250bike.com/forum/archive/index.php/t-28 Login or Register to Remove Ads
	1

05-24-2024, 03:31 PM	#5
Wijohn Junior Member Join Date: Apr 2024 Posts: 12	FYI: From what I have seen the OEM petcock have always been the same (on, primary, reserve). Looks like it was replaced. But if the bike runs ok I would not worry about it. But do download the manuals, they are a world of info! Login or Register to Remove Ads
	1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-05-2024, 01:35 PM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	The petcock on my 2009 only has three settings. On, Prime, and Reserve. Does your petcock have a vacuum tube on the back of it going to the carburetor? Mine does not allow fuel to flow to the carburetor in the On and Reserve settings unless the carburetor is asking for fuel. If it is set to Prime, then fuel will flow to the carburetor whether the engine is running or not. This setting should only be used if the bike has been sitting for a while when starting and then turned to On once the bike has started. Being an older bike, I am assuming that your petcock is not vacuum actuated, but I am unclear about that. Perhaps someone with a bike closer in manufacturing date can chime in on that.
	0

03-05-2024, 01:56 PM	#4
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	You can download the manuals on this forum. Go to search bar at the top and type in manual and then scroll down to Dupo's post.
	0