Lubing Choke Cable

Vegas Street Rider · 12-31-2016, 12:06 PM

Has anyone taken apart the the choke switch housing on the handlebar to lube the choke cable. What are the does and don'ts. I can find nothing specific. I am concerned about taking it apart and having things fall out since it houses the headlight switch and turn signal switch, etc.

Water Warrior 2 · 12-31-2016, 07:26 PM

I would try from the carb to lube it. I can't remember the ins and outs of the GZ with the tank off. But you could suspend the carb end and drip some oil or ATF into the cable housing. Give it some time to work it's way down.

Vegas Street Rider · 12-31-2016, 10:10 PM

OK. Thanks for the advice. I will try it that way. How is your upgrade project coming along on the new bike?

SkipDawg · 07-15-2017, 06:07 PM

I had the same issue, my cable is frozen up. I'd like to replace it but I can't figure out which of these cables is the actual part.

http://www.cheapcycleparts.com/oempa...3a16/handlebar

Y'all got an idea?

blaine · 07-16-2017, 08:54 AM

None of them....Thats the two throttle cables & the clutch cable.

SkipDawg · 07-16-2017, 05:26 PM

In retrospect, that's a "duh" moment. Uh, you know where the choke cable would be in the OEM parts list?

derbydave · 07-16-2017, 07:16 PM

Quote:

Originally Posted by SkipDawg

In retrospect, that's a "duh" moment. Uh, you know where the choke cable would be in the OEM parts list?

The part labeled 22 in the diagram. OEM part number 58410-13F00. If you look at the parts list. only one of the throttle cables is shown but it has two part numbers. The starter cable is the part you want. On a constant velocity carb it is technically not a choke like on a cars carburetor but rather an enricher or as they label it starter.

blaine · 07-16-2017, 08:57 PM

Quote:

Originally Posted by derbydave

The part labeled 22 in the diagram. OEM part number 58410-13F00. If you look at the parts list. only one of the throttle cables is shown but it has two part numbers. The starter cable is the part you want. On a constant velocity carb it is technically not a choke like on a cars carburetor but rather an enricher or as they label it starter.

No wonder I couldn't find the damn thing. Lol

12-31-2016, 12:06 PM	#1
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	Lubing Choke Cable Has anyone taken apart the the choke switch housing on the handlebar to lube the choke cable. What are the does and don'ts. I can find nothing specific. I am concerned about taking it apart and having things fall out since it houses the headlight switch and turn signal switch, etc. Login or Register to Remove Ads
	0

12-31-2016, 10:10 PM	#3
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	OK. Thanks for the advice. I will try it that way. How is your upgrade project coming along on the new bike? Login or Register to Remove Ads
	0

07-16-2017, 08:54 AM	#5
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	None of them....Thats the two throttle cables & the clutch cable. __________________ If at first you do succeed, try not to look surprised. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-31-2016, 07:26 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	I would try from the carb to lube it. I can't remember the ins and outs of the GZ with the tank off. But you could suspend the carb end and drip some oil or ATF into the cable housing. Give it some time to work it's way down.
	0

07-15-2017, 06:07 PM	#4
SkipDawg Junior Member Join Date: Apr 2017 Posts: 5	I had the same issue, my cable is frozen up. I'd like to replace it but I can't figure out which of these cables is the actual part. http://www.cheapcycleparts.com/oempa...3a16/handlebar Y'all got an idea?
	0

07-16-2017, 05:26 PM	#6
SkipDawg Junior Member Join Date: Apr 2017 Posts: 5	In retrospect, that's a "duh" moment. Uh, you know where the choke cable would be in the OEM parts list?
	0