what a mess...help :/

chad · 07-04-2014, 05:34 PM

OK here is the mess I have on my hands. 2006 GZ, everything worked perfect, 3300miles. my fil snapped the key off, and proceeded to wire in separate switches for the ignition switch according to the diagram on here. red to orange, o/y to bk/white, and brown to gray. Then he gave it back not running...grrr.

So here is the deal, bike turns over, all lights work, etc but will not fire, and does not have spark. I checked power at the ignition fuse and its fine.

However I noticed that the bike will crank with the kickstand down, which it didn't in the past. Can someone point me in a direction? This is my only transportation and now its my problem to fix!

chromedome195 · 07-04-2014, 09:28 PM

I am sure the more experienced folks on this excellent forum will be along soon to advise.
But I would say that there is probably a kick stand interlock that was designed to prevent the bike from starting in gear with the kickstand down or riding away with the kick stand down. That could come into play with your current problem.
By the way, welcome to the forum!

alantf · 07-05-2014, 04:39 AM

Yes...The bike is meant to start with the kick stand down. If you put it into gear with it down, the engine cuts out. This is a safety device, so you can't ride off with the kickstand down.

gz4me + · 07-06-2014, 03:18 AM

Welcome to the forum Chad. Have you talked to any Locksmith about removing the broken key? This happened to a friend of mine a few years back. Locksmith was able to get broken key out and make a new key for him. Price was not high, but might depend on Locksmith. Never hurts to check. Double check the wiring that was done. Alantf is excellent with wiring, as are a few others on here. Hopefully with every one on here, you will be back enjoying your GZ shortly.

5th_bike · 07-06-2014, 03:45 AM

I'm not sure but I remember reading here a while back that the GZ has some special anti-theft gadget in the lock such that the ignition doesn't work when it's 'hotwired'. Maybe it will work since the key is still in...

mole2 · 07-06-2014, 02:50 PM

http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

07-04-2014, 05:34 PM	#1
chad Junior Member Join Date: Jul 2014 Posts: 1	what a mess...help :/ OK here is the mess I have on my hands. 2006 GZ, everything worked perfect, 3300miles. my fil snapped the key off, and proceeded to wire in separate switches for the ignition switch according to the diagram on here. red to orange, o/y to bk/white, and brown to gray. Then he gave it back not running...grrr. So here is the deal, bike turns over, all lights work, etc but will not fire, and does not have spark. I checked power at the ignition fuse and its fine. However I noticed that the bike will crank with the kickstand down, which it didn't in the past. Can someone point me in a direction? This is my only transportation and now its my problem to fix! Login or Register to Remove Ads
	0

07-05-2014, 04:39 AM	#3
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Yes...The bike is meant to start with the kick stand down. If you put it into gear with it down, the engine cuts out. This is a safety device, so you can't ride off with the kickstand down. __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

07-06-2014, 03:45 AM	#5
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	I'm not sure but I remember reading here a while back that the GZ has some special anti-theft gadget in the lock such that the ignition doesn't work when it's 'hotwired'. Maybe it will work since the key is still in... __________________ 2005 "Saturn Black", stock + tach Login or Register to Remove Ads Last edited by 5th_bike; 07-06-2014 at 03:52 AM. Reason: removed 'greed ass' insult
	0

07-06-2014, 02:50 PM	#6
mole2 Senior Member Join Date: Dec 2009 Location: Longs, SC Posts: 1,469	http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40 __________________ 2009 V-Star 650 Silverado Pearl White 2007 Suzuki GZ250 Black (sold)
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2014, 09:28 PM	#2
chromedome195 Senior Member Join Date: May 2014 Location: New Hampshire Posts: 667	I am sure the more experienced folks on this excellent forum will be along soon to advise. But I would say that there is probably a kick stand interlock that was designed to prevent the bike from starting in gear with the kickstand down or riding away with the kick stand down. That could come into play with your current problem. By the way, welcome to the forum!
	0

07-06-2014, 03:18 AM	#4
gz4me + Senior Member Join Date: Sep 2013 Location: Santa Maria, California Posts: 234	Welcome to the forum Chad. Have you talked to any Locksmith about removing the broken key? This happened to a friend of mine a few years back. Locksmith was able to get broken key out and make a new key for him. Price was not high, but might depend on Locksmith. Never hurts to check. Double check the wiring that was done. Alantf is excellent with wiring, as are a few others on here. Hopefully with every one on here, you will be back enjoying your GZ shortly.
	0