Loss of power, torque. Sputters at full throttle - Page 2

JohnC · 11-04-2013, 10:27 PM

It's not really a choke, rather an enrichment valve. The control is just inboard of the left grip. There's another thread by a guy with a broke choke, with pictures.

pillowpants · 11-04-2013, 11:19 PM

Yeah I have a choke, but the cable is broken. I pulled on it when it was running and it turns off. I checked the S hose and it was fine.

Water Warrior 2 · 11-05-2013, 01:21 AM

Quote:

Originally Posted by pillowpants

Raul, I checked the air filter and box. They both seemed fine. I am mechanically inclined when it comes to jets. JohnC I don't have a choke on my bike, I have never noticed one before and I don't see one. Where would it be? I bought my gz250 used over a year ago and never had any problem with it.

Did you remove the air filter and check the inside surface? The airflow is from the inside to the outside so the bugs and crap plug the inner surface first.

JohnC · 11-05-2013, 12:33 PM

Quote:

Originally Posted by pillowpants

I pulled on it when it was running and it turns off.

And what turns off?

alantf · 11-05-2013, 01:00 PM

I imagine that he means the engine. Suddenly enriching a warm engine will shut it down. I learned this the hard way, one day, when I forgot to turn the choke off, and when the engine got warm, it spluttered. Turned off the choke, and back to normal.

JohnC · 11-05-2013, 01:52 PM

Yeah, but he said the cable is broken.

alantf · 11-05-2013, 04:30 PM

He said "the cable is broken. I pulled on it" I reckon that means that he pulled the broken end, and operated the choke.

JohnC · 11-05-2013, 10:22 PM

If he can do that then maybe he can pull it while the bike is sputtering to perform the test I suggested.

But, then, maybe we should stop speculating and let him speak for himself...

**jonathan180iq** · 11-06-2013, 09:25 AM

Either way, first things first, fix your choke. It's going to be hard to maintain a properly running bike when all of the things that are supposed to be working on it aren't working...even if it was running fine while it was broken before, this needs to be corrected.

Was it without choke when you bought it? How did the PO get it start without choke? I see you're in Florida, but all it takes is a slight chill and these things simply won't run without choke. Did he adjust some carb settings away from the factory default that could play a factor in the current issue?

pillowpants · 11-06-2013, 12:41 PM

I took out the carb and cleaned it, but that wasn't the problem. Come to find out my valves needed to be adjusted. Now it's running great. I still have to eventually change the springs on it. Does anyone happen to know how much those springs run for? BTW Thanks everyone for they're help.

11-04-2013, 10:27 PM	#11
JohnC Senior Member Join Date: Aug 2013 Location: New Hampshire Posts: 127	Re: Loss of power, torque. Sputters at full throttle It's not really a choke, rather an enrichment valve. The control is just inboard of the left grip. There's another thread by a guy with a broke choke, with pictures. Login or Register to Remove Ads
	0

11-04-2013, 11:19 PM	#12
pillowpants Junior Member Join Date: Apr 2013 Location: Florida Posts: 21	Re: Loss of power, torque. Sputters at full throttle Yeah I have a choke, but the cable is broken. I pulled on it when it was running and it turns off. I checked the S hose and it was fine.
	0

11-05-2013, 01:00 PM	#15
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Loss of power, torque. Sputters at full throttle I imagine that he means the engine. Suddenly enriching a warm engine will shut it down. I learned this the hard way, one day, when I forgot to turn the choke off, and when the engine got warm, it spluttered. Turned off the choke, and back to normal. __________________ By birth an Englishman, by the grace of God a Yorkshireman. Login or Register to Remove Ads
	0

11-05-2013, 01:52 PM	#16
JohnC Senior Member Join Date: Aug 2013 Location: New Hampshire Posts: 127	Re: Loss of power, torque. Sputters at full throttle Yeah, but he said the cable is broken.
	0

11-05-2013, 04:30 PM	#17
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Re: Loss of power, torque. Sputters at full throttle He said "the cable is broken. I pulled on it" I reckon that means that he pulled the broken end, and operated the choke. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

11-05-2013, 10:22 PM	#18
JohnC Senior Member Join Date: Aug 2013 Location: New Hampshire Posts: 127	Re: Loss of power, torque. Sputters at full throttle If he can do that then maybe he can pull it while the bike is sputtering to perform the test I suggested. But, then, maybe we should stop speculating and let him speak for himself...
	0

11-06-2013, 09:25 AM	#19
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Re: Loss of power, torque. Sputters at full throttle Either way, first things first, fix your choke. It's going to be hard to maintain a properly running bike when all of the things that are supposed to be working on it aren't working...even if it was running fine while it was broken before, this needs to be corrected. Was it without choke when you bought it? How did the PO get it start without choke? I see you're in Florida, but all it takes is a slight chill and these things simply won't run without choke. Did he adjust some carb settings away from the factory default that could play a factor in the current issue?
	0

11-06-2013, 12:41 PM	#20
pillowpants Junior Member Join Date: Apr 2013 Location: Florida Posts: 21	Re: Loss of power, torque. Sputters at full throttle I took out the carb and cleaned it, but that wasn't the problem. Come to find out my valves needed to be adjusted. Now it's running great. I still have to eventually change the springs on it. Does anyone happen to know how much those springs run for? BTW Thanks everyone for they're help.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode