Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 08-27-2013, 11:38 PM   #1
twelveport
Junior Member
 
Join Date: Aug 2013
Location: Quad Cities
Posts: 17
Lube

Are there any grease zerks on the bike? I was looking at the diagram in the owners manual and it shows that the kick stand needs grease but I do not see a zerk. The other lube points are for oil on cables, chains etc. Any feedback on this will be helpful.



Login or Register to Remove Ads
twelveport is offline  
Reply With Quote
Old 08-28-2013, 12:17 AM   #2
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Lube

There are no actual grease zerks on the bike. I found the easiest way to lube the side stand is just give it a shot of chain lube. I recommend Du Pont with Teflon. It is quite clean and rarely flings off. Cables can use a bit of light oil or ATF. Don't forget the choke cable and speedo. Depending on the milage of the bike you may want to put a little actual grease inside the speedo hub on the front wheel. Be very careful with the removal and install. The parts will only go in one way or you will break them. Maybe wait till you need a new tire or brake pads so you can remove the wheel once rather than twice.
Water Warrior 2 is offline  
Reply With Quote
Old 08-28-2013, 07:05 PM   #3
twelveport
Junior Member
 
Join Date: Aug 2013
Location: Quad Cities
Posts: 17
Re: Lube

Sounds like good advise, thanks!



Login or Register to Remove Ads
twelveport is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:05 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.