I can't figure it out..

[blaine]

Originally Posted by schooler94

And if it does leak its the piston rings?

No.If fluid seeps out of the combustion chamber,that your valves are not seating properly,indicating further problems with valves.
:cool:

[schooler94]

Wait... how's it gonna leak out the valves if the head's off?

[Water Warrior 2]

Originally Posted by schooler94

Wait... how's it gonna leak out the valves if the head's off?

Turn the head up side down. It it proves to hold a liquid then you may be on your way to a simple repair. You are taking the bike apart anyway so start with the head. Here's hoping good fortune smiles upon you. :2tup:

[blaine]

Originally Posted by Water Warrior

Turn the head up side down. It it proves to hold a liquid then you may be on your way to a simple repair. You are taking the bike apart anyway so start with the head. Here's hoping good fortune smiles upon you. :2tup:

Yep :cool:

[schooler94]

Ohhh I get it
You guys know how big the engine sprocket bolt is? I don't have any tools near big enough, and I don't want to get the wrong size wrench

[Water Warrior 2]

Originally Posted by schooler94

Ohhh I get it
You guys know how big the engine sprocket bolt is? I don't have any tools near big enough, and I don't want to get the wrong size wrench

The one you just bought should work.

[jonathan180iq]

Engine sprocket bolt is 30mm. Removing it is described in the sprocket tutorial:

viewtopic.php?f=8&t=317

[schooler94]

Thanks, I bought a 32mm because it was the only one bigger than 1" that harbor freight sold solo, and it worked just fine