Relay and flooding

[Water Warrior 2]

If the air box was wet with gas you can do a drain. There is a hose from the bottom of the air box that hangs down through the frame and is meant for that purpose. You will find a plug in the hose. It will have crap and gas in it. Drain hose, replace plug and be happy. Do it with every oil change even if there are no problems.

[Water Warrior 2]

Originally Posted by spicciani

Ok guys when I got home last night I decided to look at my carb . there was a small puddle of gas at the bottom of the bike and then I found out the air box had a ton of gas in it.Pulled the carb cleaned it blew out the area between he float and the gas line I had to go to sleep before I put the carb back in. But when I get home tonight ill see if the leaking has stopped and this was just a flooding situation due to the float getting stuck.

WaterW my turn signals were not working and yes I cleaned the contacts in the switch after which the right one worked intermittently

thanks alot guys

Check the bulbs and sockets for corrosion. Check for poor grounds too.

[spicciani]

Turns out the rubber gasket on brass seat was dry rotted and allowing gas to go around it , which was causing the flooding and non running . Relay is int he mail i"ll tell you guys how that works out. - Julius