2 rear seats and a worn front seat, and carb. bars also

deadman13 · 05-30-2008, 03:19 AM

bought a new front seat and the guy sent me both seats, i guess for good measure. so now i have a full worn set and a nice new seat for sale. also have a set of bars that i got with another bike that i was going to use for this one, but i didnt like the look of them and dont need them. i can ship, so let me know if you need them. make me an offer or trade

and i have the carb that came with the bike that needs cleaned since i just replaced it.

fyi, i need a few small things, like front caliper bolts, engine cover bolt (the one at the top on the sides, just need 2) and both master cylinder bolts. thanks guys!

**jonathan180iq** · 05-30-2008, 11:04 AM

You had mentioned in another post that you were going to begin working on jetting your carbs, right?

I'd just keep the spare carb and practice on that.

Easy Rider · 05-30-2008, 11:13 AM

Quote:

Originally Posted by jonathan180iq

I'd just keep the spare carb and practice on that.

Unless you already have experience rebuilding carbs, this is an EXCELLENT idea.
It also gives you some spare parts.......should you lose or damage something with the "good" one.

I might be interested in the front seat. PM sent.

05-30-2008, 03:19 AM	#1
deadman13 Member Join Date: May 2008 Location: Charleston SC Posts: 92	2 rear seats and a worn front seat, and carb. bars also bought a new front seat and the guy sent me both seats, i guess for good measure. so now i have a full worn set and a nice new seat for sale. also have a set of bars that i got with another bike that i was going to use for this one, but i didnt like the look of them and dont need them. i can ship, so let me know if you need them. make me an offer or trade and i have the carb that came with the bike that needs cleaned since i just replaced it. fyi, i need a few small things, like front caliper bolts, engine cover bolt (the one at the top on the sides, just need 2) and both master cylinder bolts. thanks guys! Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-30-2008, 11:04 AM	#2
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	You had mentioned in another post that you were going to begin working on jetting your carbs, right? I'd just keep the spare carb and practice on that.
	0