Idle Mixture Screw

[bigfour]

So, I've turned my carb so I can see underneath it and I'm looking for a brass plug but I see two brass things...

The lowermost one looks like a flathead brass screw kind of inset in the carb.

The other one is a slightly larger brass cap with a small circular indent in the middle of the cap.

Which one is the idle mixture screw/cap? I'm thinking the second one is the cap I need to remove but I just want to be sure so I don't drill through something that's actually important. Thanks.

[Dupo]

The mixture screw is behind the brass plug that is smooth. Its not the one that would have a flathead inset. They plugged it so you dont F with it, so that would be the harder one to get out

I dremeled mine off ... didnt want to drill into the screw.

[bigfour]

Thanks, I think the previous owner may have already removed the cap and the brass flathead screw was the actual idle mixture screw. Now onto the needle shim mod...

[Badbob]

There are instructions in the service manual about how to remove plug. Just though I'd toss that in for future reference.

[trykemike]

Here is a link to a discussion about carburetor tuning.

http://www.factorypro.com/tech_tuning_p ... gines.html