10-12-2011, 05:38 AM
|
#1 |
|
Junior Member
Join Date: Feb 2011
Location: San Francisco
Posts: 23
|
Tuning the idle to 1300 rpm (engine stalls)
My engine often shuts down/stall when I:
1) stop, 2) fire her up without putting in some gentle throttle, 3) clutch coasting without throttle. Per cayuse (viewtopic.php?f=5&t=5086), I suspect my idle has too little fuel in the mixture. Before I try it myself, any tips on how do I go about tuning the idle of my GZ 250 to 1300 rpm (per 2-7 of the service manual)? Login or Register to Remove Ads |
|
|
|
10-12-2011, 07:24 AM
|
#2 | |
|
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: Tuning the idle to 1300 rpm (engine stalls)
Quote:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
|
|
|
|
|
10-12-2011, 04:15 PM
|
#3 |
|
Senior Member
Join Date: Jun 2011
Location: Queens, NYC
Posts: 1,263
|
Re: Tuning the idle to 1300 rpm (engine stalls)
I have to use the idle knob everytime i start it cause i dont have a choke on the bike. (Yet). I do it by sound, as bike warms up i turn it down, but when i start it i may turn it up 4-5 full turns, and back it off as idle picks up speed. Do it by ear man, sounds like ur driving urself crazy.
Login or Register to Remove Ads |
|
|
|
|
10-12-2011, 04:30 PM
|
#4 |
|
Senior Member
Join Date: Aug 2011
Posts: 852
|
Re: Tuning the idle to 1300 rpm (engine stalls)
...
__________________
***Alert - This person is a douche. Use these comments and advice at your own risk*** |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
