07-23-2011, 08:46 PM
|
#11 |
|
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: idling issues
2 1/2 turns out is a good starting point.With the bike at operating temperature,turn the screw slowly out till the idle starts to roll(rich).Than turn slowly back in till the idle starts to get slow(lean).About midway between both extremes is were you want to be.Were the bike idles smoothest.If you are going to be a few minutes,it helps to have a fan blowing air on the engine to keep from overheating.
 :2tup:
__________________
If at first you do succeed, try not to look surprised. 
Login or Register to Remove Ads |
|
|
|
07-24-2011, 02:21 PM
|
#12 |
|
Member
Join Date: Apr 2011
Location: anaheim california
Posts: 96
|
Re: idling issues
hi all
thanks blaine.. i checked and the idle screw is uncapped so i guess it was messed with...now all i need is a definition of roll... thanks again safe biking grego |
|
|
|
|
07-24-2011, 10:16 PM
|
#13 | |
|
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: idling issues
Quote:
:cool:
__________________
If at first you do succeed, try not to look surprised.
Login or Register to Remove Ads |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
