Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 07-14-2011, 04:53 PM   #1
RBar
Junior Member
 
Join Date: Jul 2011
Location: Dayton, TN
Posts: 5
Engine question: VALVES?!

Websites state that the GZ250 has a TWO VALVE head.
The Service Manual shows what appears to be 3 valve springs, and on the underside, two intakes and two exhausts! Are these pics correct for the GZ250, or are they using a different set of pics for the service manual?

The two exhaust pipes WOULD indicate something different about this single cylinder. "TWIN DOME" combustion chamber might be another clue...
Are the pistons domed? with the spark plug in the center of the combustion chamber, that would make it sorta like a little hemi engine, right?
ANYBODY every had theirs apart?

RBar



Login or Register to Remove Ads
RBar is offline  
Reply With Quote
Old 07-14-2011, 05:23 PM   #2
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Engine question: VALVES?!

The Gz is a single cylinder 4 valve engine. 2 intake and 2 exhuast valves. Each exhuast valve has it's own port and header pipe. The pipes join up in a single muffler system. There is a single carb feeding the 2 intakes.
At one time the GZ did have only 2 valves, one intake and one exhuast.
On the 4 valve head there is a single rocker arm with 2 fingers to operate the 2 intake valves and another rocker with 2 fingers to operate the exhuast valves. hope this helps.
Water Warrior 2 is offline  
Reply With Quote
Old 07-14-2011, 05:29 PM   #3
RBar
Junior Member
 
Join Date: Jul 2011
Location: Dayton, TN
Posts: 5
Re: Engine question: VALVES?!

EXACTLY answers my question, thanks!
So, each exhaust side has its own pipe...cool.

RBar

Quote:
Originally Posted by Water Warrior
The Gz is a single cylinder 4 valve engine. 2 intake and 2 exhuast valves. Each exhuast valve has it's own port and header pipe. The pipes join up in a single muffler system. There is a single carb feeding the 2 intakes.
At one time the GZ did have only 2 valves, one intake and one exhuast.
On the 4 valve head there is a single rocker arm with 2 fingers to operate the 2 intake valves and another rocker with 2 fingers to operate the exhuast valves. hope this helps.



Login or Register to Remove Ads
RBar is offline  
Reply With Quote
Old 07-14-2011, 10:07 PM   #4
geezer
Senior Member
 
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
Re: Engine question: VALVES?!

i thougth each valve had its own cam lobe. and when was the gz a 2 valve?
__________________
99 gz 250 and a currently dismantled fzr 1000
geezer is offline  
Reply With Quote
Old 07-14-2011, 10:12 PM   #5
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Engine question: VALVES?!

Quote:
Originally Posted by geezer
i thougth each valve had its own cam lobe. and when was the gz a 2 valve?
Single lobe,double fingers.The engine was a 2 valve engine,back before the G.Z.
:cool:
__________________
If at first you do succeed, try not to look surprised.





Login or Register to Remove Ads
blaine is offline  
Reply With Quote
Old 07-14-2011, 10:41 PM   #6
geezer
Senior Member
 
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
Re: Engine question: VALVES?!

i thought so, i have the first year of the gz and its a four valve.
__________________
99 gz 250 and a currently dismantled fzr 1000
geezer is offline  
Reply With Quote
Old 07-14-2011, 11:05 PM   #7
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Engine question: VALVES?!

Quote:
Originally Posted by geezer
i thought so, i have the first year of the gz and its a four valve.
The Suzuki TU 250 uses the same engine with a 2 valve head.
:rawk:
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Old 07-14-2011, 11:39 PM   #8
geezer
Senior Member
 
Join Date: Mar 2011
Location: dahlonega GA
Posts: 563
Re: Engine question: VALVES?!

the new one?
__________________
99 gz 250 and a currently dismantled fzr 1000
geezer is offline  
Reply With Quote
Old 07-15-2011, 12:34 AM   #9
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Engine question: VALVES?!

Quote:
Originally Posted by geezer
the new one?
Yes,with fuel injection.A lot of the older bikes used the same engine,it's been around a long time.
:cool:
__________________
If at first you do succeed, try not to look surprised.


blaine is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.