04-04-2011, 06:11 PM | #1 |
Senior Member
Join Date: Aug 2009
Location: Dublin, Ireland
Posts: 269
|
The perfect idle
Just looking for some shared experiences on what you found to be the best idle
According to my new tach my bike idles at around the 1.5X1000 rpms - the bike runs fine but shutting the throttle suddenly at high revs can seem a bit too jerky sometimes I vaguely remember someone saying that the proper idle is higher than you might think but i could be wrong (as usual) as always, any info is appreciated Vii Login or Register to Remove Ads |
|
04-04-2011, 06:37 PM | #2 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: The perfect idle
I always found that 1200 RPM was ideal.Any higher would be like riding around with the choke partly on.
:cool: |
|
04-04-2011, 10:30 PM | #3 |
Senior Member
Join Date: Oct 2007
Location: HoCo, Maryland
Posts: 1,349
|
Re: The perfect idle
According to the book, it should be 1300±50 rpm. The engine should be hot when adjusting the idle setting.
I found that after the valves were set, it idled really regularly.
__________________
2005 "Saturn Black", stock + tach Login or Register to Remove Ads |
|
04-04-2011, 11:09 PM | #4 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: The perfect idle
Viirin, what you are experiencing is engine braking when the throttle is chopped. Adjust the idle as mentioned by others(1300 + or - 50 and learn to be a little smoother with the throttle. Lynda's 800 V-twin has a fair bit more engine braking...........sort of like dropping anchor. I like it because you don't need to be on the brakes just to slow down a bit or control speed so much when going down a hill.
|
|
04-05-2011, 05:16 PM | #5 |
Senior Member
Join Date: Aug 2009
Location: Dublin, Ireland
Posts: 269
|
Re: The perfect idle
Cheers for the responses guys
Dropping an anchor sounds about right as this is my first bike it seemed strange as the car didn't have nearly the same level of engine braking force as the bike and so bad habits reared their ugly heads this time in the form of pulling in the clutch, closing the throttle and slowly releasing the clutch to engage the engine more gently No surprises that this temporary coasting is enough to fail your full license test over, i tried to revert back to just closing the throttle but now i feels safer doing it the other way I thought having a higher idle speed could reduce the jerkyness of it but can it increase it if the idle is too high? vii Login or Register to Remove Ads |
|
04-05-2011, 05:47 PM | #6 | |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: The perfect idle
Quote:
Just one more thought - Our bikes (the carb) are set up differently to the American bikes. I wonder if that could be why we both experience this, but the Americans don't seem to? :??:
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
|
|
04-05-2011, 05:57 PM | #7 | |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Re: The perfect idle
Quote:
:cool: |
|
|
04-05-2011, 06:15 PM | #8 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Re: The perfect idle
Alantf, you may be on to something. With the different U.S. specs the engines run leaner and have more of a tendency to run on as it were. Richer European specs give you a little more pizzaz with the throttle and a little more engine braking with no throttle.
|
|
04-06-2011, 11:34 AM | #9 |
Senior Member
Join Date: Aug 2009
Location: Dublin, Ireland
Posts: 269
|
Re: The perfect idle
Alan, I agree with you 100% with the European thing (turns out my bike was built in Spain) and about the reduction in jerkieness when the bike gets hot - this should take less and less time now with the weather inproving
Blaine, i'll try dropping the idle from 1500 to ~1350 and see what happens, your advice has yet to steer me wrong and you should probably start charging for it - you've missed out on millions from me alone Not to highjack my own thread but but just on a side note i started a new job as a green keeper at 5am but the commute requires some motorway (...or "highway") driving - whats an acceptable amount of revs to run consistently without blowing the engine (in still on the 15tooth) Not that theres much traffic at that time but i don't think i could stand the embarrassment of being pulled over for going to slow |
|
04-06-2011, 12:19 PM | #10 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Re: The perfect idle
In England there's no minimum motorway speed. In RI the minimum is 30MPH. Over here the maximum is 120k/HR (75MPH) & I feel comfortable around 60MPH on the GZ. :2tup:
BTW, trying to get my geography straight! You're in RI, right? :??: If so,I think your speeds are in K/HR so that's around 100K/HR comfortably
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
|
Thread Tools | |
Display Modes | |
|
|