New Exhaust instillation

Aussie_Al1 · 01-20-2008, 10:28 PM

I'm just about to put on a band-spanking-new OEM exhaust system on my bike. I know its just a straight swap, BUT, will anything bite me with this change over, that might be good pointers for a for new players??

Al.

bhppy101 · 01-20-2008, 10:41 PM

Hey Al,

It should be a pretty straight forward swap....just remember to loosly put ALL the nuts and bolts on before tightening them. I change exhausts all the time on my bikes and I sometimes forget to put the frame bracket bolts on and tighten the head bolts.......Then I cant even budge the exhaust to mount it to the rear frame.

Water Warrior 2 · 01-21-2008, 12:43 AM

bhppy101, would it be advisable to use locktite on the hardware ??

bhppy101 · 01-21-2008, 12:58 AM

Locktite shouldnt be neccessary

Aussie_Al1 · 01-21-2008, 05:26 PM

Thanks All

We're actually in summer here ATM (so weve had 6 weeks of rain, TYPICAL) every couple of days ive been hitting the nuts and bolts with a penetrant/lubricant so everything is lovelly and lose and ready to go. I'll go nice and slow and tighten everything slowly, thanks for the tips.

Al'

**jonathan180iq** · 01-21-2008, 09:18 PM

Be careful with the metallic exhaust washer/spacer that you'll find on the pipe between the headers and the muffler. If your exhaust system is old, that washer will be burned onto the exhaust pipe and you'll have to replace it.

If you can, when placing on the new one, use some lubricant and make sure that you don't rip it. Doing so will not crate a solid seal and you'll always be having some of the exhaust fumes leaking out of the system.

Aussie_Al1 · 01-23-2008, 08:56 PM

Thanks, all comments taken on board :2tup:

I'll post a pic' when shes done :cool:

Al'

01-20-2008, 10:28 PM	#1
Aussie_Al1 Junior Member Join Date: Jan 2008 Posts: 15	New Exhaust instillation I'm just about to put on a band-spanking-new OEM exhaust system on my bike. I know its just a straight swap, BUT, will anything bite me with this change over, that might be good pointers for a for new players?? Al. Login or Register to Remove Ads
	0

01-21-2008, 12:43 AM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	bhppy101, would it be advisable to use locktite on the hardware ?? Login or Register to Remove Ads
	0

01-21-2008, 05:26 PM	#5
Aussie_Al1 Junior Member Join Date: Jan 2008 Posts: 15	Thanks All We're actually in summer here ATM (so weve had 6 weeks of rain, TYPICAL) every couple of days ive been hitting the nuts and bolts with a penetrant/lubricant so everything is lovelly and lose and ready to go. I'll go nice and slow and tighten everything slowly, thanks for the tips. Al' Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-20-2008, 10:41 PM	#2
bhppy101 Junior Member Join Date: Oct 2007 Posts: 17	Hey Al, It should be a pretty straight forward swap....just remember to loosly put ALL the nuts and bolts on before tightening them. I change exhausts all the time on my bikes and I sometimes forget to put the frame bracket bolts on and tighten the head bolts.......Then I cant even budge the exhaust to mount it to the rear frame.
	0

01-21-2008, 12:58 AM	#4
bhppy101 Junior Member Join Date: Oct 2007 Posts: 17	Locktite shouldnt be neccessary
	0

01-21-2008, 09:18 PM	#6
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,996	Be careful with the metallic exhaust washer/spacer that you'll find on the pipe between the headers and the muffler. If your exhaust system is old, that washer will be burned onto the exhaust pipe and you'll have to replace it. If you can, when placing on the new one, use some lubricant and make sure that you don't rip it. Doing so will not crate a solid seal and you'll always be having some of the exhaust fumes leaking out of the system.
	0

01-23-2008, 08:56 PM	#7
Aussie_Al1 Junior Member Join Date: Jan 2008 Posts: 15	Thanks, all comments taken on board :2tup: I'll post a pic' when shes done :cool: Al'
	0