Go Back   GZ 250 Forums > General Motorcycle-Related > Ride Reports & Meets

Reply
 
Thread Tools Display Modes
Old 09-28-2010, 11:52 AM   #1
BillInGA
Senior Member
 
Join Date: Apr 2010
Location: Kennesaw, GA
Posts: 296
Denver to Atlanta

Hello GZ'ers, I've been off the forum for a while - super busy at work and home.

But, it's finally that time. I'm leaving tonight for Denver to pick up my Vulcan 500.

I'll be following essentially the same route I took out to Colorado, but with some different stopping points: Pratt, KS; West Plains, MO (same as the outbound trip); and Tupelo, MS. At this point Tupelo is still up in the air. I might want to do a long day and overnight at a friend's house in Leesburg, AL, or do a really long day and go all the way home. I just depends on how I'm feeling. In any case, I have four days planned.

Weather looks like beautiful riding conditions the entire way with high temps in the high 70's / low 80's and no rain forecast. Although, with lows in the low 50's, it may be a little cool in the mornings. I'm bringing some extra layers with me and the big windshield on the Vulcan will help keep the cool wind at bay.

Tomorrow is maintenance and prep day in Colorado. I'll be installing my new backrest and throttle lock (shipped to my parent's house) and I'll be bringing my new Airhawk pneumatic seat cushion. I'm looking forward to using the Airhawk - I've heard great things about it, but haven't had a chance to try it out yet.

With the additions to the bike and the nicer weather, I'm looking forward to an enjoyable ride.

I'll post along the way if I'm able. Otherwise, I'll see you on the other side.

Bill
__________________
ATGATT - All The Gear, All The Time



Login or Register to Remove Ads
BillInGA is offline  
Reply With Quote
Old 09-28-2010, 03:01 PM   #2
dhgeyer
Senior Member
 
Join Date: Jul 2009
Location: Merrimack NH USA
Posts: 722
Re: Denver to Atlanta

Good luck Bill! Keep the rubber side down, and enjoy the ride.
__________________
54 HD Hummer,64 Honda150,66 Ducati250,01 Vulcan500,02 Vulcan1500,83 Nighthawk650,91 K75,95 VLX,04 VLX,01 GS500E,01 Ninja250, 02 Rebel,04 Ninja500,06 Concours,96 R850R
dhgeyer is offline  
Reply With Quote
Old 09-28-2010, 03:17 PM   #3
alanmcorcoran
Senior Member
 
Join Date: Jul 2008
Location: Anaheim, CA
Posts: 2,926
Re: Denver to Atlanta

Tell me more about the airhawk!
__________________
[hr:5yt6ldkq][/hr:5yt6ldkq]
http://alanmarkcorcoran.com Motorcycles, Music, Musings and More…



Login or Register to Remove Ads
alanmcorcoran is offline  
Reply With Quote
Old 09-28-2010, 04:02 PM   #4
burkbuilds
Senior Member
 
burkbuilds's Avatar
 
Join Date: Mar 2009
Location: Shannon, Georgia
Posts: 1,268
Re: Denver to Atlanta

Hope you have a great trip Bill. Let us know how it went when you return if you can't post anything along the way.
burkbuilds is offline  
Reply With Quote
Old 09-28-2010, 04:07 PM   #5
blaine
Senior Member
 
blaine's Avatar
 
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
Re: Denver to Atlanta

Enjoy your trip.Ride safe. :rawk: :2tup:
__________________
If at first you do succeed, try not to look surprised.





Login or Register to Remove Ads
blaine is offline  
Reply With Quote
Old 09-28-2010, 06:47 PM   #6
mole2
Senior Member
 
mole2's Avatar
 
Join Date: Dec 2009
Location: Longs, SC
Posts: 1,469
Re: Denver to Atlanta

Enjoy your trip Bill and ride safe. We want to see some pics when you get back so be ready to post. :poke2:


__________________
2009 V-Star 650 Silverado Pearl White
2007 Suzuki GZ250 Black (sold)
mole2 is offline  
Reply With Quote
Old 09-30-2010, 01:44 AM   #7
BillInGA
Senior Member
 
Join Date: Apr 2010
Location: Kennesaw, GA
Posts: 296
Re: Denver to Atlanta

My bike modifications are complete and I'm looking forward to getting on the road tomorrow.

Back rest, throttle lock and seat pad all went on easily. I took a short ride to Boulder and back and everything is working fine.

I expected to have to put a battery charger on this morning when I got to the hanger. However, even after sitting for two months, the engine fired right up. I was pretty excited about that.

I am missing two pieces of equipment for my return trip: GPS and CamelBak. The GPS was sent back to Garmin for a recall repair last month. It was supposed to be back last week, but no luck. Apparently they are backed up on the repair work. As for the CamelBak, I just forgot to pack it. :whistle:

I do, however, have a new phone. I picked up a Droid X two weeks ago, breaking free of the walled garden of the iPhone. The Droid has GPS and an app that lets friends and family track my position online (it's called Lattitude). Since I'm riding the same route back, I expect to only occasionally need to use the GPS.

Cheers,

Bill
__________________
ATGATT - All The Gear, All The Time
BillInGA is offline  
Reply With Quote
Old 10-01-2010, 01:23 AM   #8
BillInGA
Senior Member
 
Join Date: Apr 2010
Location: Kennesaw, GA
Posts: 296
Re: Denver to Atlanta

First leg is complete: Broomfield, CO to Pratt, KS.

The ride through eastern Colorado / western Kansas was the usual long flat grind, although I did have some pretty strong headwinds in Colorado to spice things up. I also saw two humongous fires in Kansas. I took a picture of one of them, which I'll post tomorrow.

The verdict on my equipment additions is very positive.

The Airhawk seat cushion is AWESOME! I rode all day long with absolutely no discomfort. Highly recommended. I discovered that my seating position with the Airhawk is slightly higher and farther back. This put my helmet in very turbulent air coming off the windshield. After a few hours of getting my head shaken like a martini, I finally adjusted the windshield up about an inch and a half. Problem solved. My final leg today was very comfortable - no sore butt and no scrambled brains.

The throttle lock is a great help (mine is the Vista Cruise). It really cuts down on fatigue and lets me spend more time concentrating on the road rather than chasing my speed. On the rolling hills I can easily adjust the throttle to maintain speed. Most of the time, with no other traffic, I just set it and accepted the slight loss and gain in speed going up and down the hills.

I'm also very happy with my backrest. High quality workmanship and easy to install (on the Vulcan). My duffel bag isn't quite wide enough to let me lean back on it, so I'm going to see if I can find a small pillow to fill the gap. At least I don't have to worry about my bag sliding back off the seat.

All in all it was a good day on the road. 444 miles and 12 hours start to finish (about 8 hours actual driving).

Cheers,

Bill
__________________
ATGATT - All The Gear, All The Time
BillInGA is offline  
Reply With Quote
Old 10-01-2010, 03:11 PM   #9
burkbuilds
Senior Member
 
burkbuilds's Avatar
 
Join Date: Mar 2009
Location: Shannon, Georgia
Posts: 1,268
Re: Denver to Atlanta

Hey Bill, sounds like you are having a great trip. Nice recommendations on some of your equipment for the bike, thanks. It is always nice to hear first hand how something worked from someone you trust and not just an add or commercial. Hope you have a great ride the rest of the way home.
burkbuilds is offline  
Reply With Quote
Old 10-04-2010, 03:10 AM   #10
alanmcorcoran
Senior Member
 
Join Date: Jul 2008
Location: Anaheim, CA
Posts: 2,926
Re: Denver to Atlanta

How old are you Bill? You seem to be able to knock out some serious daily mileage... A 444 mile day and I'd probably want to take the next one off. Pleas epost some pictures of your backrest and airhawk seat thingie. I am interested in fatigue reducing farkles.

I did 275 this morning coming back from DV. That's just about right for a "long" day for me. On "fun" ride days, 120-170 is plenty.
__________________
[hr:5yt6ldkq][/hr:5yt6ldkq]
http://alanmarkcorcoran.com Motorcycles, Music, Musings and More…
alanmcorcoran is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.