Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 07-18-2010, 11:18 AM   #51
Easy Rider
Senior Member
 
Join Date: May 2007
Location: Champaign, Illinois
Posts: 4,561
Re: Signal lights

Quote:
Originally Posted by Water Warrior
and 5 wheel bearings installed
OK, just gotta ask:
With only 2 wheels, how do you come up with FIVE wheel bearings ???? :??:
Typo ??
__________________
Loud pipes risk rights!



Login or Register to Remove Ads
Easy Rider is offline  
Reply With Quote
Old 07-18-2010, 02:12 PM   #52
fairweatherrider
Member
 
Join Date: May 2010
Location: Bristol,CT, USA
Posts: 73
Re: Signal lights

Quote:
Originally Posted by Water Warrior
Some things can be ordered over the net and sent here via USPS and there are no duties or tariffs, just the shipping charge. Other times it is a real hit and I have never been able to figure out what the answer might be. It is a real crap shoot and can be expensive as all get out. Example : 2 jackets sent separately USPS from New Enough in Texas. One was no extra charge from the Canadian Postal Service, the other was an extra $28. Go figure. For larger expensive items I have them sent to a mailing address in Washington and I drive down and get it. So far so good crossing the border. Just recently picked up 2 tires for half of what they cost here.
2 years ago I had 2 tires bought and installed here on the Vstrom for $450. This week with tires from the U.S. installed here and 5 wheel bearings installed plus my gas cost I was $50 ahead of last time. It ain't cheap here but thankfully I don't have to pay what riders pay in Australia.
The tires must have been an "Inflated Price" :roll:
You guys need to find a pilot and open a business.
fairweatherrider is offline  
Reply With Quote
Old 07-18-2010, 02:13 PM   #53
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Signal lights

[quote=Easy Rider]
Quote:
Originally Posted by "Water Warrior":3e9fo69r
and 5 wheel bearings installed
OK, just gotta ask:
With only 2 wheels, how do you come up with FIVE wheel bearings ???? :??:
Typo ??[/quote:3e9fo69r]
I just knew it would be you Easy. #5 bearing is a sprocket carrier bearing. That is the spendy one of the 5 in total. The sprocket in mounted to the carrier which also has the little cush drive rubbers in it. Right in the middle of the cush drive rubbers is the bearing. It probably doesn't do a lot of work but I guess it is needed in the grand scheme of things. If my mind is correct the only time it is working is when the rubbers compress on shifts, accelerating and braking. They would remove any harshness from the drive train. After 45,000 kms the rubbers are still virtually new so I couldn't be that hard on a bike.



Login or Register to Remove Ads
Water Warrior 2 is offline  
Reply With Quote
Old 07-18-2010, 02:21 PM   #54
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
Re: Signal lights

fairweatherrider, it wouldn't be tires and I wouldn't need a pilot. There are quite a few hiking trails at the Alberta/Montana border and a backpack can carry a lot of recreational medication. Would I do it.......no. Would others do it........of course.
Water Warrior 2 is offline  
Reply With Quote
Old 07-18-2010, 03:19 PM   #55
fairweatherrider
Member
 
Join Date: May 2010
Location: Bristol,CT, USA
Posts: 73
Re: Signal lights

Quote:
Originally Posted by Water Warrior
fairweatherrider, it wouldn't be tires and I wouldn't need a pilot. There are quite a few hiking trails at the Alberta/Montana border and a backpack can carry a lot of recreational medication. Would I do it.......no. Would others do it........of course.
I meant legally...of course.



Login or Register to Remove Ads
fairweatherrider is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.