transmission work

1Rogue · 07-18-2007, 06:42 PM

Has anyone worked on the transmission in their GZ. If so how difficult is it to get to and does it really require all the "special" tools the service manual shows?

The service manual makes it look very intimidating, but I really don't want to spend the $900 the dealership wants to charge.

Water Warrior 2 · 07-20-2007, 04:17 AM

What is the problem with the tranny ?? How many miles are on the bike ??

motoprof · 06-12-2009, 11:53 AM

The job of transmission repair is as hard as the tools that you own. If you have all the tools and skills, the job is pretty easy. If not, the job is really hard and you may end up breaking parts. Here is a list of tools that I would consider minimum for the job.

1. Basic hand tools

2. Flywheel puller

3. Case separating tool

4. Air impact and air compressor

5. Ring compressor and piston holder

6. CLEAN work bench

7. Service Manual

tommyjoebilly · 04-25-2010, 06:50 PM

Motoprof, is it possible to separate the case without the special tool? And what is "air impact" and why is it needed? :??:

07-18-2007, 06:42 PM	#1
1Rogue Member Join Date: May 2007 Location: Sachse, TX Posts: 41	transmission work Has anyone worked on the transmission in their GZ. If so how difficult is it to get to and does it really require all the "special" tools the service manual shows? The service manual makes it look very intimidating, but I really don't want to spend the $900 the dealership wants to charge. Login or Register to Remove Ads
	0

06-12-2009, 11:53 AM	#3
motoprof Junior Member Join Date: Apr 2009 Location: Binghamton, NY Posts: 2	Re: transmission work The job of transmission repair is as hard as the tools that you own. If you have all the tools and skills, the job is pretty easy. If not, the job is really hard and you may end up breaking parts. Here is a list of tools that I would consider minimum for the job. 1. Basic hand tools 2. Flywheel puller 3. Case separating tool 4. Air impact and air compressor 5. Ring compressor and piston holder 6. CLEAN work bench 7. Service Manual Login or Register to Remove Ads
	0

04-25-2010, 06:50 PM	#4
tommyjoebilly Member Join Date: Apr 2010 Location: Connecticut Posts: 36	Re: transmission work Motoprof, is it possible to separate the case without the special tool? And what is "air impact" and why is it needed? :??:
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-20-2007, 04:17 AM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	What is the problem with the tranny ?? How many miles are on the bike ??
	0