click when let out the clutch at low throttle

[5th_bike]

Originally Posted by dannylightning

quick question about the rear axle nuts after tensioning the chain, it says you want about 50 lbs of torque [...] does that sound about right

Yes, the book says 78 Nm, that's about 56 lbs.

[Water Warrior 2]

A half inch drive should be more than adequate with a strong arm or 2.

[dannylightning]

i guess i should mention, i found out what the problem was. sometimes i was barley tapping the gear shifter up and it was not quite changing gears. i was paying attention to what i was doing and did not hear it click when i shifted but when i let the clutch out and that clicked it in to gear.

i started hitting the gear shifter just a little harder to where i would hear it click and it has not happened since.