Clutch Release camshaft

oneyunguy · 03-15-2007, 09:35 PM

First,

My camshaft has some vertical play. When the clutch lever is pulled, the shaft is drawn towards the ground while turning. Is this correct? The engine goes quiet while the clutch lever is pulled, but when released, there is a slight knocking sound... is this fromt he shaft?

Wondering how easy it would be to fix an oil leak in the camshaft (it leaks a little bit out the top). Is there nothing to it but replace the oil seal?

Is there a certain way the camshaft has to be out back in if it is drawn out?

04-19-2007, 08:49 PM

DELETED

Water Warrior 2 · 04-21-2007, 04:16 PM

The noise is a common characteristic and not a worry. No idea about the shaft itself.

03-15-2007, 09:35 PM	#1
oneyunguy Member Join Date: Aug 2006 Location: Vancouver, British Columbia, Canada Posts: 79	Clutch Release camshaft First, My camshaft has some vertical play. When the clutch lever is pulled, the shaft is drawn towards the ground while turning. Is this correct? The engine goes quiet while the clutch lever is pulled, but when released, there is a slight knocking sound... is this fromt he shaft? Wondering how easy it would be to fix an oil leak in the camshaft (it leaks a little bit out the top). Is there nothing to it but replace the oil seal? Is there a certain way the camshaft has to be out back in if it is drawn out? __________________ 1999 Suzuki GZ250 SOLD 2006 Yamaha XVS650 Login or Register to Remove Ads
	0

04-21-2007, 04:16 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	The noise is a common characteristic and not a worry. No idea about the shaft itself. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-19-2007, 08:49 PM	#2
Guest Posts: n/a	DELETED
	0