|
![]() |
#1 |
Junior Member
Join Date: Jul 2020
Location: Nashville
Posts: 7
|
Relocate choke knob to carb
Anyone have any good recommendations for a simple push pull knob i can just screw into the carb and eliminate the cable and handlebar choke slider?
Much appreciated!! Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: May 2020
Posts: 23
|
I did it on my bike. The cable was rusty and frozen at the lever. I removed the entire cable cleaned up all the pieces going into the carb- spring, plunger and housing. I cut the cable maybe 2 inches added a small ferrel where the cable would be inserted and crimped on a small ring terminal then a key ring onto that. Makes it easy to pull. Very simple and works great but you do have to physically hold it open until it warms up. No more than a minute or two. No pictures are uploading for some reason
|
![]() |
![]() |
![]() |
|
|