|
|
09-19-2018, 08:05 PM
|
#1 |
|
Junior Member
Join Date: Aug 2018
Location: Montreal
Posts: 14
|
Chain Slack
I know there is another topic about chain slack, but I just want to be clear about this because the suggested slack at the service manual seems weird.
According to the SM, the slack should be between 5-15 mm or 0.2 to 06 inches. This is certainly not enough slack, I adjusted my bike to this spec and I'm pretty sure I would damage the chain if I run like that because is VERY tide. Any help ? Login or Register to Remove Ads Last edited by tondi; 09-19-2018 at 08:14 PM. |
|
|
|
09-19-2018, 08:23 PM
|
#2 |
|
Member
Join Date: Aug 2018
Location: Chelsea Ok
Posts: 46
|
Hey T,
5-15mm is .2- .6 inches of slack. I think a half inch is pretty good. I usually just let the chain set slack and only lift it upwards and measure. It's been a few years, but I think thats about normal for all of em. Brad
__________________
Brad Bachelor "Marrying an old bachelor is like buying second-hand furniture." - Helen Rowland |
|
|
|
|
09-19-2018, 09:33 PM
|
#3 | |
|
Junior Member
Join Date: Aug 2018
Location: Montreal
Posts: 14
|
Quote:
Sent from my SM-T530NU using Tapatalk Login or Register to Remove Ads |
|
|
|
|
 |
|
|
Hybrid Mode
