I'm shopping for a new motor.

[spldart]

Mine is making to much bad noise nowadays and I need the bike for commuting
so... I got a few hundred $ set aside and made a request to a net of 65 salvage
yards for a gz250 bare engine that can make an ok compression number.

What years can I safely swap into a 2000 model?

[blaine]

All models of G.Z. are same motor.

[spldart]

Oh wow! Oki doki
Now to wait for a response to my shopping email

[mtbdrew]

Originally Posted by spldart

Mine is making to much bad noise nowadays and I need the bike for commuting
so... I got a few hundred $ set aside and made a request to a net of 65 salvage
yards for a gz250 bare engine that can make an ok compression number.

What years can I safely swap into a 2000 model?

So what noise is being made? Where do you think it is coming from?

[spldart]

Piston slap.
Valve train noise even though lash is set right.
Nasty hit and miss clunks from case during gear engagement. Esp first at a stop.
Occasional lockups of shifting mechanism requiring numerous clutch engagements to sort.
Lots of rattling at startup till oil pressure builds. (always do a idle warm up)
Slow progressive loss of compression over time. (using 2 separate gauges to be sure)

I still have enough compression left to get it started most of the time first time but well below 100 psi now.
I'm not getting oil by the rings yet but enough blow by that I'm getting lots of oil in the airbox.
etc etc etc.
I've been asking to much of a small engine for a while now.
Saving for a bigger bike for this nasty commute.

[Water Warrior 2]

Originally Posted by spldart

Piston slap.
Valve train noise even though lash is set right.
Nasty hit and miss clunks from case during gear engagement. Esp first at a stop.
Occasional lockups of shifting mechanism requiring numerous clutch engagements to sort.
Lots of rattling at startup till oil pressure builds. (always do a idle warm up)
Slow progressive loss of compression over time. (using 2 separate gauges to be sure)

I still have enough compression left to get it started most of the time first time but well below 100 psi now.
I'm not getting oil by the rings yet but enough blow by that I'm getting lots of oil in the airbox.
etc etc etc.
I've been asking to much of a small engine for a while now.
Saving for a bigger bike for this nasty commute.

You can't say the bike hasn't given it's heart and soul to you. Luckily you can get a transplant.

[spldart]

Originally Posted by Water Warrior 2

You can't say the bike hasn't given it's heart and soul to you. Luckily you can get a transplant.

But but... I hadn't gotten tired of it yet

[Water Warrior 2]

Originally Posted by spldart

But but... I hadn't gotten tired of it yet

Communication breakdown here. You are shopping for a transplant in the bike's engine location.

[spldart]

Originally Posted by Water Warrior 2

Communication breakdown here. You are shopping for a transplant in the bike's engine location.

I'm definitely gonna keep this 'little bike that could' but plans may have changed.
I hope to have enough saved before it expires to buy something with some more
mass to it.
A liter plus v-twin perhaps.


Then I'll go back to rebuild the pipsqueak.

[blaine]

V-Star 1100...Well balanced & a ton of aftermarket parts.