Turn signals switch

buud · 04-06-2015, 12:44 AM

Have about 8,000 mileage; the turn signals switch is somewhat arthritic... feels like sandpaper moving from a turn signaled back to "rest" position in both directions.

Should I be lubricating or otherwise attending to this item?

Thanks for your help

alantf · 04-06-2015, 05:44 AM

Why not try blasting some aerosol contact cleaner into the swich. It's cheap enough, and if it doesn't work you've lost nothing.

buud · 04-06-2015, 08:22 PM

Thanks. I'll give it a shot.

Bristow · 06-23-2015, 01:23 PM

I just got my 2005 gz250 and the turn signal switch was rough. I opened it up and used some steel wool on the metal components that touch to remove a small amount of corrosion and overall make everything smooth. This fixed my turn signal switch being rough/difficult to move back and forth and now it works great.

04-06-2015, 12:44 AM	#1
buud Junior Member Join Date: Sep 2011 Location: Chicago, Illlinois Posts: 24	Turn signals switch Have about 8,000 mileage; the turn signals switch is somewhat arthritic... feels like sandpaper moving from a turn signaled back to "rest" position in both directions. Should I be lubricating or otherwise attending to this item? Thanks for your help Login or Register to Remove Ads
	0

04-06-2015, 05:44 AM	#2
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	Why not try blasting some aerosol contact cleaner into the swich. It's cheap enough, and if it doesn't work you've lost nothing. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

04-06-2015, 08:22 PM	#3
buud Junior Member Join Date: Sep 2011 Location: Chicago, Illlinois Posts: 24	Thanks. I'll give it a shot. Login or Register to Remove Ads
	0

06-23-2015, 01:23 PM	#4
Bristow Junior Member Join Date: Jun 2015 Posts: 8	I just got my 2005 gz250 and the turn signal switch was rough. I opened it up and used some steel wool on the metal components that touch to remove a small amount of corrosion and overall make everything smooth. This fixed my turn signal switch being rough/difficult to move back and forth and now it works great.
	0