choke cable disconnected?

Kyguylal · 09-20-2014, 01:22 PM

Hello. I went to start my bike today and it seems like the choke isn't working. I can turn the adjuster very easily. Makes me think the cable disconnected. Any ideas on how to fix this? First bike and I haven't done motorcycle work before.

alantf · 09-20-2014, 01:53 PM

First, unscrew it at the carb end, and see if you can pull the inner. It may be a broken cable. Try the simple things first.

tnastvogel · 10-19-2014, 01:27 AM

Unscrew the little cap on the carb and pull a little on the cable. A little piston with a pin on the end should slide out. If it's broken you might need to get a screw extractor in there to get it out.

ImaginativeFig · 10-20-2014, 03:44 PM

I had the opposite problem of you, my choke control got gummed up. I would agree with them, I'd start by looking at where the choke plunger goes into the carb on the left side of the bike. My problem was partially a kinked, rusty spring maybe yours is broken or something? Here's a video of me messing with mine. I always like to see things in motion to help me understand

09-20-2014, 01:22 PM	#1
Kyguylal Junior Member Join Date: Jul 2014 Posts: 18	choke cable disconnected? Hello. I went to start my bike today and it seems like the choke isn't working. I can turn the adjuster very easily. Makes me think the cable disconnected. Any ideas on how to fix this? First bike and I haven't done motorcycle work before. Login or Register to Remove Ads
	0

09-20-2014, 01:53 PM	#2
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,720	First, unscrew it at the carb end, and see if you can pull the inner. It may be a broken cable. Try the simple things first. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

10-19-2014, 01:27 AM	#3
tnastvogel Junior Member Join Date: May 2014 Posts: 24	Unscrew the little cap on the carb and pull a little on the cable. A little piston with a pin on the end should slide out. If it's broken you might need to get a screw extractor in there to get it out. Login or Register to Remove Ads
	0

10-20-2014, 03:44 PM	#4
ImaginativeFig Senior Member Join Date: Jan 2014 Location: College Station, Texas Posts: 138	choke cable disconnected? I had the opposite problem of you, my choke control got gummed up. I would agree with them, I'd start by looking at where the choke plunger goes into the carb on the left side of the bike. My problem was partially a kinked, rusty spring maybe yours is broken or something? Here's a video of me messing with mine. I always like to see things in motion to help me understand
	0