Pulling an Engine?

Jim Moore · 02-02-2014, 08:24 AM

Hi Guys,

I'm looking for information on pulling an engine. I tried a search. I saw several mentions of pulling an engine, but I didn't see a How-To or anything like that. Does something like that exist?

Thanks,

Jim Moore
Jax, Fl

grasshopper · 02-03-2014, 10:08 AM

I have not seen any videos on pulling the engine for the gz250 either. I used to have a gs500 and I pulled the motor out of two of them no problem.biggest thing is review your service manual before you get started and have all the tools and jacks your gonna need to take it out.

Goose51683 · 02-03-2014, 04:10 PM

The service manual located on this site should give you a step by step on pulling and disassembling the engine. That's what I used when I did mine.

Water Warrior 2 · 02-03-2014, 04:39 PM

Takes lots of pics as you go. You will have a real record of the bike during the removal part. Cans for nuts and bolts with labels too.
Use zip ties to hold some small things out of the way to help clear a path for major parts.

02-02-2014, 08:24 AM	#1
Jim Moore Junior Member Join Date: Jul 2013 Location: Jax, FL Posts: 3	Pulling an Engine? Hi Guys, I'm looking for information on pulling an engine. I tried a search. I saw several mentions of pulling an engine, but I didn't see a How-To or anything like that. Does something like that exist? Thanks, Jim Moore Jax, Fl Login or Register to Remove Ads
	0

02-03-2014, 04:10 PM	#3
Goose51683 Senior Member Join Date: Apr 2013 Location: Indiana Posts: 621	The service manual located on this site should give you a step by step on pulling and disassembling the engine. That's what I used when I did mine. Login or Register to Remove Ads
	0

02-03-2014, 10:08 AM	#2
grasshopper Senior Member Join Date: Dec 2013 Location: manning, sc Posts: 484	I have not seen any videos on pulling the engine for the gz250 either. I used to have a gs500 and I pulled the motor out of two of them no problem.biggest thing is review your service manual before you get started and have all the tools and jacks your gonna need to take it out.
	0

02-03-2014, 04:39 PM	#4
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Takes lots of pics as you go. You will have a real record of the bike during the removal part. Cans for nuts and bolts with labels too. Use zip ties to hold some small things out of the way to help clear a path for major parts.
	0