Exhaust gasket

Hrvstmn31 · 12-06-2013, 08:18 PM

I am an idiot I replaced the exhaust gaskets on my bike and now this bolt (picture) is coming up short and I can't put the bolt in any idea what I did wrong?

blaine · 12-06-2013, 08:53 PM

Quote:

Originally Posted by Hrvstmn31

I am an idiot I replaced the exhaust gaskets on my bike and now this bolt (picture) is coming up short and I can't put the bolt in any idea what I did wrong?

Loosen bolts at the head & line everything up in proper position than tighten.

Hrvstmn31 · 12-07-2013, 01:09 PM

I tried that several times should i get another set of gaskets or just take it to a shop?

Cathy · 12-09-2013, 02:18 AM

So you loosened the bolt the header and still have not enough wiggle room to line it up ?

That is not right, with these steps from scratch (Exhaust off);

Put gasket on
Line up exhaust
Screw bolt in 3-4 threads on header
Line up hanger and screw in 3-4 threads

Then slowly torque all three to spec.

12-07-2013, 01:09 PM	#3
Hrvstmn31 Member Join Date: Nov 2012 Location: Austin, Texas Posts: 35	I tried that several times should i get another set of gaskets or just take it to a shop? Login or Register to Remove Ads
	0

12-09-2013, 02:18 AM	#4
Cathy Senior Member Join Date: Nov 2013 Location: Vancouver BC Posts: 157	So you loosened the bolt the header and still have not enough wiggle room to line it up ? That is not right, with these steps from scratch (Exhaust off); Put gasket on Line up exhaust Screw bolt in 3-4 threads on header Line up hanger and screw in 3-4 threads Then slowly torque all three to spec.
	0