|
06-09-2013, 08:18 PM | #1 |
Junior Member
Join Date: Jun 2013
Location: Dalton, Ga.
Posts: 4
|
Wont start
Just jioned, looking for info on a friends bike, but feel ,may be on from time to time helping her. Ok, have fully charged battery, been on trickle charge for 5 days. 13.2 volts on install, 12.9 after trying to start once. Will turn over 2-3 times the stop turning, no selonoid clicking, just stops cranking. Pulled boot back from bolt that connects wire to starter and is hot enough that can only touch for a second or 2. Turns slow when it does turn. Checked on Cheapcycleparts for new starter, just incase. Only shows parts for it, not complete starter. Is there a way of checking the starter without having to tear apart? Is there something else I should be looking at? I'm fair, but no expert in these matters. Have done all my own maintenance on my own bike, but its a 800 Vulcan, different animal. Be very thankful for any help.
Login or Register to Remove Ads |
|
|
|