Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 03-29-2013, 12:07 PM   #1
theironsoldier
Junior Member
 
Join Date: Mar 2013
Location: United Kingdom
Posts: 7
Electrical trouble with a GZ125

I have a 2003 GZ125 (everything identical to the GZ250 besides the engine) and here is the problem I am having:

I started it up, everything working perfectly, and drove 5 miles. 8 hours later I tried to start it and nothing happened when I pressed the starter.

I checked all the switches, but no obvious problems. I checked the Starter Solenoid, and found the fuse was blown but was the wrong size (30A instead of 20A). I changed the fuse, no fix. I replaced the Solenoid itself, no fix.

I then manually connected the Solenoid contacts and it started up. Everything was working fine, including all electrical components. I drove it home, 5 miles, and found that the battery had exhausted(down to about 10v) to the point that it would not start again.

I am at a total loss as to what would cause these problems.

There are no obvious/visible faults with any of the wiring.

I can get used parts rather easily and affordably, but I am not sure what I need to replace. Any suggestions as to what would cause this?

EDIT: Above, Battery was at 10v when I returned home.



Login or Register to Remove Ads
theironsoldier is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:22 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.