Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > GZ250-Specific > General Maintenance

Reply
 
Thread Tools Display Modes
Old 11-22-2011, 09:08 PM   #1
lenkf
Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 43
First oil change at 600 miles

My 2009 just hit 600 miles so was time for first oil change. Local Suzuki store had filters for $5 and change so I got 2. Also got 2 o-rings that are behind the filter just in case, but didn't have to use one.

It was tricky to loosen the oil drain plug and none of my tools would work due to the odd angle. Lucky the spark plug tool in the OEM tool kit worked great. The bolt was really tight and I bent the levering tool I used with the spark plug tool, but it finally budged.

The oil filter cover was stuck and suddenly broke free with fingernail pressure. Of course that dripped oil all over the engine, frame, exhaust and ground Next time shouldn't be so bad and I'll know to have more paper towels at the ready! The o-rings, small and large, were still pliable and in tact so I didn't need replacements.

After buttoning up the engine, I poured a liter of oil in the engine, then slowly poured a little more at a time until I got the oil to the middle of the oil level glass. I started and ran the engine for a minute to allow the filter to fill up. Forgot to replace the filler hole so had a little mess to clean up. Rechecked the oil level with the bike balanced. I stopped when the level was just below "F" with the bike balanced.

Bike runs a bit smoother with new oil.

Lenkf



Login or Register to Remove Ads
lenkf is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.