Register Community Calendar Today's Posts Search

Go Back   GZ 250 Forums > General Motorcycle-Related > Other Models/Manufacturers

Reply
 
Thread Tools Display Modes
Old 11-26-2010, 01:52 PM   #1
burkbuilds
Senior Member
 
burkbuilds's Avatar
 
Join Date: Mar 2009
Location: Shannon, Georgia
Posts: 1,268
Running "Darkside"

RUNNING DARKSIDE:
I've been studying this for a while now and I've watched a bunch of You Tube videos where people have done it and I'm thinking of giving it a shot in the near future. Anybody else out there running "Darkside" on their Vulcan 500's, or another bike? (Darkside is running a car tire on the rear instead of a Motorcycle tire). I just ordered a BF Goodrich T/A radial ( 155/80R15) that I think will fit. Firestone also makes a car tire that should fit. The TA might be just a little wide, I'll have to see when I get it. I put calipers on the narrowest part of the rear fender where the tire needs to clear width wise and got 6.5". The TA is 6.1" at the widest point, which is a little less than a 1/4" clearance on each side but the OD is really close at 24.7" , the OE Bridgestone tire is 25.2" OD and 5.5" wide. I also considered a Firestone Car tire (F560 145 R15) which is 5.6" wide and an overall diameter of 24.3", but it didn't seem to be the same quality of tire that the BFG T/A is. The BFG has a Tread wear rating of 400, Traction rating A and an S speed rating and cost $63 The load rating is about double of the OE Bridgestone and based on what I've read in the rags I should get at least double the 12,000 miles I'm currently getting out of the Bridgestone rear tire and maybe triple or more. Right now I'm having to replace the rear tire every six months, so double that and I'll only have to do it once a year.



Login or Register to Remove Ads
burkbuilds is offline  
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:41 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.