Almost there....

adrianinflorida · 03-12-2009, 02:22 PM

New shocks, handlebars, grips, lots of polishing, just about to where I'm happy with the results. Still need to do something with the header rust and polish the aluminum side covers on the engine and the brake line is due to be replaced, going to get a stainless line about 4 inches longer than stock so that I can lay the bars back a bit more to the rear without pulling on the brake line at all.

03-12-2009, 02:22 PM	#1
adrianinflorida Senior Member Join Date: Feb 2009 Location: Indialantic, Florida Posts: 325	Almost there.... New shocks, handlebars, grips, lots of polishing, just about to where I'm happy with the results. Still need to do something with the header rust and polish the aluminum side covers on the engine and the brake line is due to be replaced, going to get a stainless line about 4 inches longer than stock so that I can lay the bars back a bit more to the rear without pulling on the brake line at all. Login or Register to Remove Ads
	0